Picture Save Destination (Cards And Built-In Memory); Remaining Battery And Memory Capacity; Setting The Clock - Panasonic Lumix DMC-FP3 Operating Instructions Manual

Inserting and removing the card (optional)/
the battery
(Continued)

Picture save destination (cards and built-in memory)

Pictures will be saved to a card if one is inserted, or to the built-in memory
■
Built-in memory (approx. 40 MB)
●
Pictures may be copied between cards and the built-in memory (→77).
●
The access time for the built-in memory may be longer than the access time for a card.
●
[QVGA] in [REC QUALITY] only can be available to record motion pictures in the built-in memory.
■
Compatible memory cards (optional)
The following SD standard-based cards (Panasonic brand recommended)
Type of Card Capacity
SD memory 8 MB – 2 GB • Can be used with devices compatible with
cards
• Before using SDXC memory cards, check
SDHC memory 4 GB – 32 GB
cards
SDXC memory 48 GB – 64 GB
cards
• Cards in capacities not listed at left are not
●
Please reformat the card with this camera if it has already been formatted with a
computer or another device. (→22)
●
If the write-protect switch is set to 'LOCK', the card cannot be used to record or delete
pictures, and it cannot be formatted.
●
It is recommended that you copy important pictures to your computer (as
electromagnetic waves, static electricity, or faults may cause data to be damaged).
●
Latest information:
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)

Remaining battery and memory capacity

Remaining battery (only when using battery)
If the battery mark flashes red, recharge or replace battery. (→9)
Displayed when no card inserted (pictures will be saved to built-in memory)
Pictures remaining (→96)
When in operation
(Card) or (Built-in memory) are illuminated red.
This means that an operation is in progress, such as the recording, reading, deleting,
or formatting of pictures. Do not turn off the power or remove the battery, card, or AC
adaptor (optional) (this may cause damage to or loss of data).
Do not subject the camera to vibrations, impact, or static electricity. Should any of these
cause camera operation to be terminated, attempt to perform the operation again.
12
VQT2P49
Notes
the respective formats.
that your computer and other devices
support this type of card.
http://panasonic.net/avc/sdcard/information/
SDXC.html
supported.
(flashes red)

Setting the clock

The clock is not set when the camera is shipped.
if not.
Do not touch the lens.
Lens cover
Switch (LOCK)
Setting the date and time
Setting the date
display format
Setting the time display format
Open the lens cover
The power is turned on.
If [PLEASE SET THE LANGUAGE] is
displayed
→ go to step
If [PLEASE SET THE CLOCK] is displayed
→ go to step
Touch [LANGUAGE SET]
Touch the language you wish to
set
• Touch ▲▼ on the screen to change the
page. Zoom lever can also be used to
change the page.
If [PLEASE SET THE CLOCK] is displayed
Touch [CLOCK SET]
Setting date and time and display
format
• Setting the date and time
→ Touch ▲▼ on the screen to set
• Setting the date display format
→ Touch ◄► on the screen and choose
from [M/D/Y], [D/M/Y] or [Y/M/D]
• Setting the time display format
→ Touch ◄► on the screen and choose
from [AM/PM] or [24HRS]
• To cancel → Touch [CANCEL]
• When set to [AM/PM], 0:00 midnight is AM
12:00, and 0:00 noon is PM 12:00.
VQT2P49
13