Varying The Sound Quality With The Manual Equalizer; Varying The Sound Quality With The Acoustic Image (Al) Equalizer - Panasonic SC-AK14 Operating Instructions Manual

1
2
1
2
1
2
1
2
26
RQT5539
Varying the sound quality with the
manual equalizer
Dial [SOUND EQ] to display "MANUAL".
When it is turned clockwise, the settings are selected in the
following sequence.
1 HEAVY
1
2 CLEAR
3 SOFT
4 DISCO
1
5 LIVE
6 HALL
7 MANUAL
2
8 AI-EQ
9 FLAT
2 Adjust the sound quality.
1
Characteristics of each sound range
Under 100 Hz:
Around 330 Hz:
Around 1 kHz:
Around 3.3 kHz:
Above 10 kHz:
2
direction:
When the level is in the center, the dot flashes rapidly.
Repeat steps 1 and 2 to set the desired sound quality.
The original display is restored on the display panel in about 5
seconds.
To release the equalizer
Dial [SOUND EQ] to display "FLAT".
Notes
•
The sound quality setting is stored automatically. It is recalled
when "MANUAL" is next selected.
•
All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.
Varying the sound quality with the
acoustic image (Al) equalizer
The Al equalizer uses the SOFT, SHARP, HEAVY and LIGHT sound
quality coordinates to achieve subtle sound quality settings with ease.
Press [3D AI EQ] to adjust the surround level.
Every time you press the button:
3D AI 1
AI-EQ (Light off)
Adjust the sound quality.
1
2
direction:
Repeat steps 1 and 2 to set the desired sound quality.
The original display is restored on the display panel in about 5
seconds.
To release the equalizer
Dial [SOUND EQ] to display "FLAT".
Notes
•
The sound quality setting is stored automatically. It is recalled
when "Al-EQ" is next selected.
•
All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.
direction: For selecting the range of the sound to
be adjusted
Super woofer range
Bass to midrange
Midrange
Midrange to treble
Treble
For adjusting the level (7 steps)
3D AI 2
direction: SOFT–SHARP setting
LIGHT–HEAVY setting