Panasonic NV-SJ230AM Operating Instructions Manual page 7

Auto Tuning Using the On Screen Display
Introduction
The VCR is tuned automatically by Plug in Auto Tuning.
However, Auto Tuning using the On Screen Display should
be performed according to the following method if necessary.
Preparations
– Confirm that the TV is on and the VCR viewing channel is
selected.
– Turn on the VCR and select any programme position
except AV.
Operations
1 Press the MENU button
the Main menu on the TV screen.
2 Press the Cursor buttons (34
to select [TUNER PRESET] then
press OK button .
3 Press the Cursor buttons (34
to select [AUTO TUNE] then press
the Cursor buttons (21
21 21 21) 21
the Auto Tuning.
– When Auto Tuning is completed,
the On Screen Display disappears
and programme position 1 is
selected.
Channels that can be Received
SYSTEM
B CCIR Standard
E2–E12
G (B.G.H)
Hong Kong
Special
I Administrative
Region of China,
UK (I)
East Europe
R1–R12
(D.K.K1)
D
K
China
C1–C12
(D)
Notes:
– Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
– Auto Tuning takes five or more minutes to complete its
search.
– If the VCR is not correctly tuned by Auto Tuning, follow the
procedure on pages 7-8.
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
to display
CH ADD&DELETE
SYSTEM
OPTION
SELECT : , OK
END :MENU
34 34 34 34)
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
SYSTEM
OPTION
SELECT : , OK
END :MENU
34 34) 34 34
TUNER PRESET
CH 1
CLEAR
AUDIO SYSTEM
to start COLOUR SYSTEM
AUTO TUNE
SEARCH
FINE
SELECT:
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 1 SEARCH
The number displayed here
is the number of channels
still to be auto tuned.
VHF CATV
S01–S05
M1–M10
E21–E69
U1–U10
S21–S41
– – E21–E69
44–470MHz E21–E69
Z1–Z35 C13–C57
Manual Tuning Procedure
1 Press the MENU button
the TV screen.
2 Press the Cursor buttons (34)
PRESET] then press OK button
3 Press the Cursor buttons (34)
select the channel number you want tuned by pressing
the Cursor buttons (21)
4 Confirm that [CLEAR] is set to [OFF].
5 Press the Cursor buttons (34)
SYSTEM] then select the broadcasting system by
pressing the Cursor buttons (21)
– BG:
– I:
– DK:
6 Press the Cursor buttons (34)
SYSTEM] then select [AUTO] by pressing the Cursor
buttons (21)
– The VCR automatically distinguishes between PAL and
OFF
[ ]
[ BG ]
[ AUTO ] SECAM broadcasts.
[ 3 ]
– If the picture lacks colour when [AUTO] is selected,
END :MENU
select [MESECAM] or [PAL].
7 Press the Cursor buttons (34)
then press the Cursor buttons (21)
Tuning.
– If the desired TV station has not been tuned, press the
100
END: MENU Cursor buttons (21)
– Press the MENU button
each programme position you want to tune to a station.
CH 2 SEARCH
UHF
8 Press the MENU button
Screen Display.
Fine Tuning Procedure
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Press the Cursor buttons (34)
press the Cursor buttons (21)
tuning condition.
– Press the OK button
state.
5 Press the MENU button
the On Screen Display.
to display the Main menu on
to select [TUNER
.
to select [CH] then
.
to select [AUDIO
PAL B.G.H/SECAM B.G
PAL I
PAL D/SECAM D.K.K1
to select [COLOUR
.
to select [SEARCH]
again.
and repeat steps 3–7 for
CH 2
END: MENU
three times to exit the On
to select [FINE] then
to obtain the best
to return the tuning to its former
to exit
.
to start the Manual
SEARCH 74
END: MENU
CH 2 AFC: OK
FINE : END: MENU
7