Setting The Initial Control Head's Id - Motorola ASTRO XTL 2500 User Manual

Setting the Initial Control Head's ID

The Front Panel Programming (FPP) mode allows you to define
which control head in a Multi Control Head system becomes control
head number 1 and control head number 2.
Set the control head ID number for the second attached head the first
time Multi Control Head is used.
1 Press the power button to power off the radio.
2 Press and hold the left-most
button on the control head simultaneously. While continuing to
depress these two buttons, press the power button to power on
the radio and the control head.
POWER BUTTON
3 The radio and the control
head will power on into FPP
mode. The display shows
control head's ID number.
4 Turn the Mode knob to change the control head's ID number.
Note: In Multiple Control Head (MCH) installations, the yellow
ignition wire must be connected to the head assigned ID
#1.
ASTRO XTL 2500 Digital Mobile Radio
Multiple Control Head Features
button and the emergency
XTL 2500
LEFT-MOST
MENU BUTTON
CH ID#
EMERGENCY
BUTTON
1
15