Table of Contents
Advertisement
Timer-recording radio programs (continued)
Tips
• To exit the standby
mode, press STANDBY
twice to make the
indication disappear.
• The preset settings
remain until you reset
them.
• When you select both
sides recording, the
recording will stop
after the both sides
recording finishes so
that accidental
recording will not be
made.
28
The Timer
5
Set the timer to the hour and the minutes you want
to start recording.
1 Press TUNE TIME SET
+ or – to set the hour
and press ENTER
MEM.
2 Press TUNE TIME SET + or – to set the minutes,
and press ENTER MEM.
6
Set the timer to the hour and the minutes you want
to stop recording. (Do as step 5.)
7
Press TUNE TIME SET + or – to set the volume
you want, and press ENTER MEM.
8
Press STANDBY.
The power goes off and the player enters the
standby mode. The
side of the tape (upper side N or reverse side
n) appear in the display. If the n indication
appears, press STANDBY to change the recording
side to N.
At the preset time, the power will go on and the
recording will start. Then the power will go off at
the preset time, and the player will enter the
standby mode again.
indication and the recording
Advertisement
Table of Contents
