Sony UP-2300 Operating Instructions Manual page 15

4
Select INPUT SEL by pressing the ◊ or √ button.
I NP U T SE T UP CO L OR n n n
/ COL / LA Y / PRN / I N / OUT /
I NP U T SE L V I DEO/ SV / RGB
H U E 2
CO L OR 0
O F F
G A I N
O F F S E T 0
A GC 0
/ O F F
Q 1 A 1
Position the cursor to INPUT SEL
by pressing the ◊ or √ button.
5
Select the input signal by pressing the ı or ∫ button.
I NP U T SE T UP CO L OR n n n
/ COL / LA Y / PRN / I N / OUT /
I NP U T SE L V / S V I DEO/ R
H U E 2
CO L OR 0
G A I N O F F
O F F S E T 0
A GC 0
/ O F F
Q 1 A 1
Switch the desired input signal
to green by pressing the ı or ∫
button. The selected input
signal turns green and is
spelled out.
Source signal of the image to be printer
Signal from video equipment connected to the VIDEO INPUT connector
Signal from video equipment connected to the S-VIDEO INPUT connector
Signal from video equipment connected to the RGB/SYNC INPUT connectors
a) only for the UP-2800.
6
Press the MENU button.
The regular screen appears.
I NP U T S E L :
Press the ◊ or √ button until INPUT
S
SEL appears.
I NP U T S E L :
v / S _ V I DEO / r
S
Disply the apelled-out input signal by
pressing the ı or ∫ button. The selected
input signal turns green and is spelled out.
V I D EO / s v / r
Video monitor and
printer window
display (the selected
input signal is
spelled out)
V n VIDEO
S n S VIDEO
a) R n RGB
Operation
15