Aiwa TD-UM8000 Hardware Installation Manual page 13

To disconnect this unit, follow the following procedure.
1
Quit the tape backup program, then wait until the ACCESS
indicator goes off.
2
Remove the tape cartridge.
3
Disconnect the USB cable.
4
Press the power switch to turn off this unit.
5
Disconnect the AC power cord of this unit from an AC
outlet.
Caution
Do not attempt to disconnect this unit during the tape backup operation.
Doing so may cause malfunctions.
Note
Do not connect or disconnect any USB devices while this unit is performing backup
or restore operations. This may result in loss of data.
13