Setting The Tape Drive - Aiwa TD-UM8000 Hardware Installation Manual

7
The following window appears. Select "Easy Install", then
click on the Install button.
8
After completing the installation, click on the Restart
button.
This completes the installation of the backup software.
MEMO
The device driver for this unit will be installed into the Extensions folder in the
System folder.

Setting the Tape Drive

You can set this unit either horizontally or vertically.
Set the unit on a flat place.
Do not, however, place the unit with its bottom or the LED side facing upward.
NOT THIS WAY!
Note
Do not use this unit where it may be subject to vibration or shock.
Bottom of the unit
Select Easy Install.
Click.
NOT THIS WAY!
LED side
11