Table of Contents
Advertisement
Network Profile Configuration
Configuring your Network Profiles
Your phone is wirelessly connecting to the Internet
via a built in WAP browser.
Use this menu to create and customize the profiles
containing the settings for connecting your phone
to the network. Although you can change the active
connection, please ask your local retailer or
customer service representative to assist.
1. In Idle mode, press Menu
Connectivity
2. Highlight one of the following options and
press the View soft key.
• <Service provider> Web
• <Service provider> MMS
• <Service provider> Streaming
– or –
Settings
Network Profiles.
Press Options
Select soft key or the
new connection.
Note: Web, MMS and Streaming settings are pre-configured
and cannot be altered on this screen. Your phone is
set up by default for connecting to the network.
3. Select one of the following parameters to
edit. They may or may not appear depending
on the Network Profile that was selected:
• Set name: enter a profile name.
• Access name: edit the access point name.
• Auth type: select the type of authentication used
for this WAP connection: None, Normal, or
Secure.
• User ID: enter the User ID required to connect to
the network.
Create, and press the
key to create a
Changing Your Settings
127
Advertisement
Table of Contents
