Listening To The Radio; Internet Radio; Presetting Stations Automatically/Manual - Panasonic SC-HC37 Operating Instructions Manual

Listening to the radio

You can preset up to 30 channels.
Preparation
Make sure that the FM antenna is connected. (
A station previously stored is overwritten when another station
is stored in the same channel preset.
Presetting stations
automatically
1
Press [RADIO] to select "FM".
2
Press [PLAY MENU] repeatedly to select
"A.PRESET" and then press [OK].
3
Press [3, 4] to select "LOWEST" or "CURRENT"
and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(FM 87.50).
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to "Manual tuning and
presetting".
The tuner starts to preset all the stations it can receive
into the channels in ascending order.
Listening to a preset channel
Preparation
1
Press [RADIO] to select "FM".
2
Press [PLAY MENU] repeatedly to select
"TUNEMODE" and then press [OK].
3
Press [3, 4] to select "PRESET" and then press
[OK].
1
Press [RADIO] to select "FM".
2
Press [:/6] or [5/9] to select the
channel.
∫ Manual tuning and presetting
Select a radio broadcast.
1
Press [RADIO] to select "FM".
2
Press [PLAY MENU] repeatedly to select
"TUNEMODE" and then press [OK].
3
Press [3, 4] to select "MANUAL" and then press
[OK].
4
Press [:/6] or [5/9] to tune to the
required station.
≥ To start automatic tuning, press and hold [:/6],
[5/9] until the frequency starts scrolling. Tuning
stops when a station is found.
10
RQT9685
To preset the channel
5
While listening to the radio broadcast
Press [OK].
6
Press [3, 4] to select the channel and then press
[OK].
8)
∫ To improve FM sound quality
1
While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select "FM MODE"
and then press [OK].
2
Press [3, 4] to select "MONO" and then press
[OK].
≥ This setting can be preset and memorised. To do so,
continue to step 5 of "Manual tuning and presetting".
≥ Select "STEREO" in step 2 to return to stereo broadcasts.
≥ "MONO" is cancelled if the frequency is changed.
≥ If "MONO" is selected, regardless of the type of signal this
unit is receiving, "FM MONO" is displayed. (
∫ To display the current signal status
Press [PLAY MENU] to display "FM STATUS" and
then press [OK].
"FM ST": The FM signal is in stereo.
"FM": The FM signal is in monaural.
≥ "FM" is also displayed even if this unit is not tuned to a
station.
∫ To display RDS text data
Press [DISPLAY] to display the text data.
≥ Each time you press the button:
PS: Programme service
PTY: Programme type
FREQ: Frequency display
≥ "STEREO" is displayed when this unit tunes to a stereo
broadcast.
≥ The unit can display the text data transmitted by the radio
data system (RDS) available in some areas. (RDS displays
may not be available if reception is poor.)

Internet Radio

This unit can output Internet radio if "vTuner for
Panasonic" is installed on your iPhone/iPod touch.
Preparation
≥ Install "vTuner for Panasonic" to your iPhone/iPod
touch.
≥ Install iOS 5.0 or later.
1
Insert the iPhone/iPod touch to this unit.
2
Press [iPod] repeatedly to select "VTUNER".
{. "vTuner for Panasonic" starts.
≥ Visit the below website for the following information about
"vTuner for Panasonic":
http://radio.vtuner.com/panasonic/en/
(Compatible iPhone/iPod touch models and software
versions, purchasing, installation and operation details.)
≥ A pop-up screen may appear on your iPhone/iPod touch.
Follow the indicated instructions.
below)