Table of Contents
Advertisement
DAILY CHECKS
This video is designed for use on
a consistent basis therefore,
please check the VCR condition
before use, daily.
• When there is any abnormal operation or
trouble of the VCR during daily checking,
take appropriate actions referring to
"trouble shooting" section on pages 40~42.
• If the abnormal operation or trouble
remains unresolved, pull out the power
cable, and then contact your dealer.
43
Daily checks
1
Turn on the VCR power
• Check to see whether there is good quality
picture on the TV monitor.
• Check to see whether the time and date
are correct.
2
Rewind a little of
the tape recorded
on the previous
day.
3
PLAY
Press the PLAY
button for playback.
• Check to see whether
there is any problem
during playback.
• Check to see whether the
recorded time and date
are properly set.
4
Set the TIME MODE
to "L6H(L8H)".
TIME MODE
5
In the case of too much noise on
the screen.
• Clean the Head using cleaning tape.
BEFORE REQUESTING SERVICE
1
Careless handling by the user is not covered.
Strong impacts.
Video head damage due to improper cleaning.
Foreign substances entering the unit.
Unauthorized internal modification by the user.
Use in high or low temperature, high humidity, or smoky areas.
Operation other than described in the instructions.
Use of power sources other than specified for the unit.
2
Operating Time Counter
Note that it displays a maximum time of 9999.
Refer to Alarm Function for proper operation.
The table of Cleaning Lubrication and replacement time
about principal parts
• This table is for normal temperature and humidity. It is necessary to check more frequently under
extreme conditions.
• The life of the cylinder assembly depends on the operation conditions.
• If you have any questions. Please contact an authorized technician.
: Cleaning
: Check & replacement as necessary
500
1000
2000
TAPE GUIDE POSTS
CYLINDER ASSY
PINCH ROLLER
CAPSTAN MOTOR
BELT PULLEY
SOLENOID BRAKE UNIT
*Remark
– The clean the parts, use patch and alcohol(solvent).
– After cleaning, use the video tape after alcohol has dired completely.
– We recommend to use oil [EP-56] or solvent.
– One or two drops of oil should be applied after cleaning with alcohol.
– Apply oil periodically (Apply oil after cleaning)
– Applying oil excessively may cause malfunction.
: Add Oil
: Change
3000
4000
5000
6000
8000
10000
44
Advertisement
Table of Contents
