Band Selection; Active Line; Sound Settings; Incoming Calls - Samsung Anycall SGH-X628 User Manual

Table of Contents

Advertisement

Menu functions

Band selection

(Menu 3.6)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
Combined GSM 900/1800, GSM 1900, and Triple band.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
When you select a new band, your phone
automatically searches for all available networks. Your
phone registers with a preferred network within the
band.

Active line

(Menu 3.7)
Some SIM cards may be used with two subscriber
numbers. If your SIM card supports it, use this menu
to select the line that is used to make calls. Calls can
be answered on both lines, regardless of the selected
line.
36

Sound settings

(Menu 4)
Use this menu to customise various sound settings.

Incoming calls

(Menu 4.1)
Use this menu to select a volume level and alert type
for incoming calls.
Default melodies: select a ring tone for the call
ringer from the default melodies.
My ring tone: select a ring tone for the call from
melodies received in messages, downloaded from
wireless web, or imported via Samsung PC Studio
programme.
Ring volume: select a ringer volume.
Alert type: specify how you are to be informed of
incoming calls.
Melody: the phone rings using the selected ring
tone.
Vibration: the phone vibrates but not rings.
Vibration then melody: the phone vibrates three
times and then starts ringing.

Advertisement

Table of Contents
loading

Table of Contents