Table of Contents
Advertisement
9. Click "OK" button when network configuration is complete.
3.3 Connecting to Netcam
3.3.1. Connecting from Internet
1. Run Internet Explorer from your PC.
2. Enter "http://IP Address (or URL): Port number" in the address field, then press "Enter."
The URL is composed of lower case "w," the last six digits of Netcam's MAC Address, and the
DDNS Server Address.
Example: http://IP Address: Port number
Or http://(Last six digits of MAC Address).websamsung.net: Port number
* MAC Address can be identified from the label at the back of Netcam.
* When the Port number is 80 (default value), you don't need to enter port number at the end
of the address.
Example: http://168.219.13.250
Or http://wfff06b.websamsung.net
* Internet Service Provider (ISP) may block the port that has the number 80.
You need to enter the port number when it is a number other than 80.
Example: http:// 168.219.13.250:8080
Or http://wfff06b.websamsung.net: 8080
3.3.2. Connecting from Local Network
1. Run the SNC Installer, select the Netcom you want from the screen where the search is
complete, and then right click it. You may see the Smart Viewer of the Netcam by selecting
"Go to Homepage."
Video Netcam | SNC-L200
Netcam Configuration
20
4. Using Smart Viewer
4.1 Connecting to Netcam
1. Open the Internet Explorer, and enter "http://IP Address (or URL): Port number" in the
address field, then press "Enter" to connect to Netcam.
2. Network password screen appears.
Enter Username (U) and Password (P), then click "OK" button.
The initial Username is "root," and the password is "root."
4.2 Installing ActiveX Control Program
When first connected, "Security Alert" window may appear.
If you want to see videos (Motion JPEG), you need to install ActiveX Control program.
* When first connected, the download time for ActiveX may vary based on the network
environment.
4.2.1 Windows 2000 Users
In case of having security warning shown below, click on "Yes".
Video Netcam | SNC-L200
21
Advertisement
Table of Contents
