Battery Charge Status; Name Of The Handset - Siemens Gigaset C300A User Manual

μ
Saved
Please note
If your phone receives the date and time during Caller ID Display (e.g., through
your network provider or PBX), you can specify whether this date/time should
be applied to your phone:
¤ *#Q5#M3 ¤ Q or or 2 ¤
§Menu§
u Q: Never
u : Once, in case the date/time is not set on your phone
u 2: Always
Display in idle status
Once the phone is registered and the time set, the screen display is as follows
(example).
Screen display
u Reception between the base and the handset:
– Good to poor: Ð i Ñ Ò
– No reception: |
Green: Eco Mode is activated (¢ page 40)
u Activating the answering machine:
Ã
: Your answering machine is set with
a prerecorded announcement.
u Battery charge status:
– U white: charged over 66 %
– V white: charged between 33 % and 66 %
– e white: charged between 10% and 33%
– = red: charged below 10%
= e V V white: battery charging
–
u INT 1
Internal name of the handset (¢ page 43)
Your phone is now ready for use!
Taking the first steps
The display shows Saved. You will hear
a confirmation tone and the handset
automatically reverts to idle status,
or returns to the "Settings" menu if
the setting was made using the menu.
§OK§
Ð
Redial
U
Ã
10:53
04.23.10
INT 1
Menu
17