Siemens Gigaset C300A User Manual page 15

Taking the first steps
Initial charging and discharging of the batteries
The correct charge status can only be displayed if the battery is first fully charged
and discharged.
¤ Charge the handset in the base for 8.5 hours.
Please note
The handset must only be placed in the designated Gigaset C300/C300A base
or charger.
¤ After charging, remove the handset from the base and only replace it when the
batteries are fully discharged.
Please note
u The handset is pre-registered with the base. If you have purchased a model
with multiple handsets, all handsets will already be registered with the
base. You do not need to register the handset again.
u After the first battery charge and discharge, you may place your handset in
the charger after every call.
u Always repeat the charging and discharging procedure if you remove the
batteries from the handset and reinsert them.
u The batteries may warm up during charging. This is not dangerous.
u Over time, it is normal for the charge capacity of the batteries to decrease for
technical reasons.
14
8.5 hrs