Table of Contents
Advertisement
Printing Reports and Lists
If Option Setting 19 (Auto Print Out) is set to YES, a report will
be automatically printed out whenever information on 30
operations has accumulated. (A report can still be printed on
demand at any time.)
All information is erased after a report is printed out. If automatic
print-out is disabled and print-out has not been performed
manually for 30 operations, the information on the oldest
operation will be overwritten each time a new operation is
performed.
Explanation of headings
SENDER/
The fax number of the other machine involved in the transaction. In the case
RECEIVER
of a transmission, the number dialled appears. In the case of a reception, the
programmed ID of the sending machine appears. If this machine does not
have an ID function, the communication mode will appear (for example,
"G3").
PAGES
Number of pages transmitted or received.
NOTE
OK
P.FAIL
persists, try a different outlet. If necessary, have an electrician check your
power lines.
JAM
the paper or document is loaded properly. Make sure the operation panel is
shut securely.
NO PAPER
COM.E-0
See Line Error in Chapter 11.
CANCEL
pressed, no document was in the feeder, or the other machine requested
transmission using a function which your fax does not have. If you were
attempting to fax, make sure a document is in the feeder. If you were
receiving, contact the faxing party to see how they are trying to send to you.
94
- Transmission/reception was normal.
- A power failure occurred. If you have power and the problem
- A problem with the paper or original document occurred. Make sure
- You ran out of paper during reception.
COM.E-7
to
- Transmission was cancelled because the
- A telephone line error prevented the transaction.
STOP
key was
Advertisement
Table of Contents
