Table of Contents
Advertisement
8
Option
Settings
The option settings let you customise your fax to better suit your needs.
An initial setting has been made for each option at the factory. You can
change a setting by following the steps described for each option below.
Setting 1: FINE RESOLUTION PRIORITY
This option sets the default resolution (the resolution used if a setting is not
made with the RESOLUTION key) for transmitting documents. Press 1
(YES) to set the default resolution to FINE, or 2 (NO) to set it to STANDARD.
Initial setting: 2
FUNCTION
YES
1
Setting 2: GREY SCALE SETTING
This sets the grey scale used for the HALF TONE resolution setting. Press 1
for 16 levels (this gives lower quality and faster transmission) or 2 for 64
levels (this gives higher quality and slower transmission).
Initial setting: 2
FUNCTION
16
1
or
84
FUNCTION
4
or
Display
4
will show:
NO
or
2
GRAY SCALE LEVEL
4
Press
64
NUMBER OF RINGS
2
First press
FUNCTION
then press
scroll through the
options.
FINE PRIORITY
until
GRAY SCALE LEVEL
display
shows:
and
4
,
or * to
#
STOP
STOP
Advertisement
Table of Contents
