Table of Contents
Advertisement
Setting 13: LANGUAGE SELECT
This sets the language used in display messages, reports, and lists. Press the
START/MEMORY key, the # key or the * key one or more times until the
desired language appears in the display, and then the START/MEMORY key
again.
FUNCTION
4
START/MEMORY
STOP
Setting 14-1: PBX CONNECTION
Press 1 (YES) if the machine is connected to a PBX. Press 2 (NO) if it is
connected to a regular public line.
Initial setting: 2
FUNCTION
4
YES
or
1
Setting 14-2: PBX SELECT
This sets the mode used for connecting calls from a PBX to an outside line.
Refer to your PBX manual or consult your supplier for the correct setting.
Make the selection by entering a number from 1 to 3 as follows:
1:
2:
3:
Initial setting: 3
(If you select 3, Setting 14-3 will subsequently appear in the display. If you
select 1 or 2, Setting 14-4 will appear.)
until
Press
display
shows:
or
START/MEMORY
Press
NO
(If you select 1, Setting 14-2 will
2
subsequently appear in the display. If
you select 2, Setting 14-4 will appear.)
Earth
Flash
ID
LANGUAGE SELECT
PBX CONNECTION
until
PBX CONNECTION
display
shows:
Option Settings
89
Advertisement
Table of Contents
