Registering The Cordless Handset - Sharp FO-K01 Operation Manual

Registering the Cordless Handset

After the initial charging,
the cordless handset
display shows:
PLEASE REGISTER
1
On the cordless handset, hold down
INTER
until the display at right appears.
COM
2
Press
1
3
On the fax machine, hold down
until the display at right appears.
4
Press
1
5
On the fax machine, enter a number
from 2 to 4. This number identifies the
cordless handset.
•
This completes the registration
procedure.
Note: If ALREADY STORED appears in the display, the number you selected
has already been assigned to another cordless handset. Try a different
number. (If you need to use a number that is already in use, delete the
cordless handset that uses that number as explained on page 10.)
Note: If you pause more than one minute between any of the above steps,
registration will be canceled.
on the cordless handset.
on the fax machine.
To use the cordless
handset, you must
first register it with
the fax machine.
Cordless handset display:
MODE SELECT
1: HS ENTRY
2: HS DELETE
HS ENTRY MODE
Fax machine display:
INTERCOM
MODE SELECT
1: HS ENTRY
2: HS DELETE
PRESS HS NUMBER
Example: "2" is selected
HS2 ENTERED
Both displays return to the
normal standby display
5