Macros; Programming Macros - Medion 83388 Manual

Macros

Using a macro, you can save a chain of commands, meaning that several functions can be
executed consecutively. You can program three macros and store them on the number
keys 1, 2 and 3.
These three number keys have the additional labels TV, VCR,
DVD, so that you can assign macros accordingly.
Each macro can include up to ten key commands. A macro can
include different devices. In this way you could, for example, switch on the TV set, the
desired channel, the video recorder and the recording function by simply pressing the
MACRO key and the selected number key 1, 2 or 3.
The Setup and MACRO keys cannot be used for a macro.
If you would like to interrupt macro programming prematurely, press Setup. In this case,
the macro is not saved.

Programming macros

1. Keep the Setup key pressed for approx. 3 seconds, until
SETUP
appears.
2. Press Setup briefly four more times to open the
SETUP
menu.
3. Press OK to open the
4. Confirm once again with OK.
5. Now select the number key 1, 2 or 3 where the macro is to
be saved.
MACRO 1 MODE?
6. The query
corresponds to the previously selected number key.) Press a
mode key for the device where the command is to start.
7. The input query
02
( for the second step). Now carry out the function that you
would like to save as a macro. You can press up to 9 other
keys and you can also change devices via the mode keys.
8. When the series of steps is finished, press the
save the macro.
The macro is saved automatically after step 10.
SUCCESS
9. The confirmation message appears.
Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: 83388
MACRO SET
mode.
appears. (The number
MACRO 1 KEY?
appears with the step number
CODE
MACRO
MACRO
key to
13
25