Sharp SF-1116 Operation Manual page 66

MULTI BYPASS FEEDER (SF-MF15)
A3
A4
A4
R
A5
B4
8 1 13
2
EXTRA
64
4 Press the TRAY SELECT (
5 Leave the copy quantity at 0 if using special papers. Set
the number of copies if using standard copy paper.
C
6 Press the print (
Blinking
AC
If the bypass feeder becomes empty during continuous copying,
will blink in the copy quantity display informing the operator
that paper should be added. If
present in the bypass feeder, paper has not been fed correctly.
Gently pull out the misfed paper in this case. If the paper cannot
be pulled out, remove it referring to page 23, "Misfeed in the
transport area, fusing area and exit area".
In either case, after carrying out the necessary remedy, press
the print (
copying. To cancel the blinking
press the clear (
) key to select the bypass.
) button.
blinks when copy paper is
) button to cancel the blinking
without restarting copying,
)key.
and to restart