Sharp SF-1116 Operation Manual page 38

USER PROGRAMS
Program No. 15: Resetting account
Program No. 15 is used to reset all accounts or to reset any desired
individual accounts. When program No. 15 is entered, "0" will blink on
the right side of the copy quantity display.
If no account number has been registered, "15E" will appear in the
copy quantity display. Press the
2 on page 31.
1 2 3
4 5 6
8 9
7
0/ C
ZOOM
%
36
key. You will return to step
1. To reset an individual account, press key 0 on the 10-key
pad.
To reset all accounts, press key 1.
2. Press the print (
If you have pressed key 0 in step 1, an account number will
appear in the copy quantity display. Proceed to step 3.
If you have pressed key 1, the number of copies against all
account numbers will be reset. Proceed to step 5.
3. Use the copy ratio display (
account number to be reset.
Use the key to advance through the account numbers.
4. Press the print (
The number of copies against the specified account number will
be reset.
5. To continue with other user programs, enter other
program numbers. To exit the user program mode,
press the TRAY SELECT (
) button.
) key to select the
) button.
) key.