Sharp AR-405 Operation Manual page 72

TEXT STAMP
OK
CANCEL OK
DATE
WATERMARK
PRINT
DIRECTION
SELECT
DATE
STAMP
PAGE
WATERMARK
NUMBER
1 2 3
INT
4 5
6
7
8 9
AUDIT CLEAR PROGRAM
0
P
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO AUTO A4
EXPOSURE PAPER SELECT
3-38
Press the lower "OK" key.
9
SELECT
Select the print direction.
STAMP 10
PAGE
NUMBER
Press the upper "OK" key.
11
OK
OK
Make all other desired copier selections and enter the
12
CLEAR ALL
desired number of copies.
CA
Press the START (
13
START
Replace the finished original with the next original after
14
the START (
the START (
READ-END have been scanned. Then, press the "READ-END" key
on the touch panel.
100%
COPY RATIO
The TEXT STAMP menu will appear again.
If the PAMPHLET COPY function is used with this function, the
portrait orientation ( ) must be selected.
) key.
If the document feeder is used, scanning of originals and copying
will start.
If the document glass is used, proceed to the next step.
) key indicator lights up, and then press
) key. Repeat this step until all originals
Copying will start at this time.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
To cancel the WATERMARK function, select the WATERMARK
function again and press the "CANCEL" key.