Two-sided copying with bypass tray
Two-sided copies can be made manually using the bypass tray. The
procedure described below is useful for users of the AR-281 without
an optional duplex module (AR-DU1).
2
1
2
1
4
3
4
3
CA
A4
A4
A3
O A4
100%
R SELECT
COPY RATIO
Place the first original face down on the document glass
1
and make a copy.
●
The first side of the copy can be made using any of the paper feed
stations.
Replace the first original with the second original and
2
close the document cover.
●
Make sure the first and second originals are oriented in the same
way on the document glass.
●
The first and second originals can be set in the document feeder
tray. However, they must be set individually.
Turn the first copy over without changing its top-bottom
3
orientation and place it into the bypass tray.
●
Be sure to feed the copies one sheet at a time.
1 2
Press the "PAPER SELECT" key and select the bypass
4
CLEAR ALL
tray.
START
Press the START (
5
SPECIAL PAPERS (manual feed)
) key.
2-15