Setting Up By Autosearch - Medion Remote Control Manual

SETTING UP BY AUTOSEARCH

With this function you can find the correct code also automatically:
1. Switch on the device you want to operate (TV, VCR, etc.)
2. Press and hold "SETUP" button for 3 seconds. The LED will light up
continually after blinking.
3. Release "SETUP" button.
4. Shortly press the button for the mode you want to operate.(TV,VCR,SAT)
5. Shortly press the "PROG+" button. The remote control transmits the codes
successively (Interval 1 sec). If the device doesn't have a channel function
press instead of "PROG+" the "PLAY" or "POWER" button.
6. When the device reacts to the remote control press "OK". If you missed to
press "OK" in the right moment you can go back step by step to the right
code by pressing "PROG-"
Note: If you wish a larger transmitting interval (3 sec instead of 1
sec) press the "PROG+" ("PLAY","POWER") button twice in step 5.
6