Siemens S35i User Manual page 72

Problem Problem Possible Causes Possible Causes
Problem Problem Possible Causes Possible Causes
Voice Mail not Divert not set.
working
I
" " flashing Message store full.
Cannot send a Service providers do not support
message this service.
Service centre phone number
incorrect or not set.
SIM card contract does not support
this service.
Service provider overloaded.
Destination does not have a
compatible phone.
Cannot set a Not supported by service provider
function or registration required.
Charge counter Charge unit pulse not transferred. Contact service provider.
not working
PIN error 3 incorrect entries.
Phone CODE 3 incorrect entries.
error
Service provider No authorisation for this service.
CODE error
Too few/too Functions may have been added or
many menu removed by the service provider
entries using the SIM card
Fax function Incorrect settings in PC.
unavailable
No authorisation for this service.
Wrong IrDA driver.
Accidents Accidents
Accidents Accidents
Severe shock Remove and refit the battery and SIM. Do not dismantle.
Immersion in Dry immediately with cloth; do not heat. Dry connector contacts thor-
water oughly. Remove and dry the battery and SIM. Stand unit upright in an
air current. Do not dismantle.
Troubleshooting Troubleshooting Troubleshooting Troubleshooting
Possible Corrective Measures Possible Corrective Measures
Possible Corrective Measures Possible Corrective Measures
Set divert
(see page 54).
Delete messages to make room
(see page 37).
Check with service provider.
Set service centre
(see page 44).
Contact service provider.
Try again.
Check with service provider.
Contact service provider.
Enter the MASTER PIN (PUK)
provided with the SIM as in-
structed. If you have lost the
MASTER PIN or PIN, contact the
service provider.
Contact Siemens Service
(see page 68).
Contact service provider.
Check with the service provider.
Check the settings
(see page 63).
Contact service provider.
Replace the IrDA driver.
71