Gigaset A510 IP User Manual page 13

Configuring the VoIP connection
IP 1
Back
Provided that your phone is set for auto-configuration (default setting), you will see the following
display. Otherwise, for more information, see
If you have received a regis-
tration name/password
and, if applicable, a user
name:
>
Press the key below
on the display screen.
>
For more information,
see .
10
If your phone cannot establish a connection to the Internet, one of the following messages is
displayed: IP address not available or Internet conn. not available.
>
Press the right display key
(step ).
12
Further information about possible error causes can be found in the user guide on the enclosed
CD.
The configurable IP connections are shown in the following
displays (IP 1 to IP 6). VoIP connections that are already
configured are marked with ³.
³
OK
>
If necessary, press down on the control key
a connection.
>
Press the
Do you have
auto conf code?
§No§
No
§OK§
to end the VoIP wizard and start the connection assistant
§OK§
display key to continue.
.
10
¶
Yes
w
If you have received an auto-
configuration code:
>
Press the key below
on the display screen.
>
For more information,
see .
9
to select
§Yes§
11