Configuring the VoIP connection
7
Starting the configuration process
When your handset is sufficiently charged (approx. 20 minutes after you have placed it in the
charger), the message key
If "New firmware available" is shown in the display, updated firmware is already available for
your phone. Press the right-hand display key §Yes§. The new firmware is loaded. This takes approx.
6 minutes. The message key f will now flash again.
Press the message key f to start configuration.
>
8
Starting the IP assistant
¶
Start IP
wizard?
No
>
Press the key below
(= right display key).
If the connection assistant does not start correctly, or if you cancel the connection assistant, you
can start it via the following menu on the handset:
w
¢ Ï ¢
(press right)
10
f
on the handset flashes.
Yes
§Yes§
on the display
¢
Telephony
VoIP Wizard
>
Press the message key
The IP wizard
helps you to
configure an IP
Back
>
Press the down of the control key
scroll down.
§OK§
>
Press the
f
on the handset.
V
OK
display key to continue.
w
to