Configuring The Voip Connection; Prerequisite For The Following Steps; You Will Need - Gigaset A510 IP User Manual

Configuring the VoIP connection

Instead of using the following procedure, you can also enter the VoIP access data and the assign-
ment of the VoIP connection as send and receive connection using your PC (steps
>
Launch the Web browser on your PC.
>
Enter the URL www.gigaset-config.com in the address field of the web browser and press the
return key.
You are connected to your base's Web configurator. To register with the Web configurator, you will
need the system PIN for the phone (default setting: 0000).
A description of the Web configurator can be found in the user guide on the enclosed CD and in
the Web configurator online help document.

Prerequisite for the following steps:

Before you can use VoIP to phone any other subscribers on the Internet, the fixed line network or
the mobile phone network, you need a VoIP account.
>
Set up a VoIP account with a VoIP provider.
>
Have your VoIP account data you received from your VoIP provider to hand.

You will need:

>
Your registration name (login ID), your password and, if applicable (provider-dependent), a user
name (often this is your VoIP phone number).
Or
>
Your personal auto-configuration code (activation code), if your provider supports "automatic
configuration".
to :
)
7 12
9