Camera Setup - Samsung SMO-150TRN(P) User Manual

3. CAMERA SETUP

You can change the Camera ID, LOSS DETECT, MOTION
DETECT and Camera Preset values.
Select "3. CAMERA SETUP "from the MAIN MENU using the
Rotary Wheel and press ENTER to display the following screen.
[CAMERA SETUP]
SETUP CAMERA 1...
SETUP CAMERA 2...
SETUP CAMERA 3...
SETUP CAMERA 4...
SETUP CAMERA 5...
SETUP CAMERA 6...
SETUP CAMERA 7...
SETUP CAMERA 8...
Select the desired channel using the Rotary Wheel and press ENTER
to go to the display of the selected channel. The following screen
will appear.
[SETUP CAMERA 1]
CAMERA ID
LOSS DETECT
IRIS
SHUTTER
WHITE BALANCE
SPECIAL...
FOCUS
MOTION DETECT...
EXIT
• All the items, except "CAMERA ID "and "LOSS DETECT," will
be available for setting only after the system is connected to a
camera (SOC-420(P) or SOC-920(P), sold separately).
• Select the desired item using the Rotary Wheel and press ENTER.
Then change the preset value using the Rotary Wheel and press
ENTER to complete the setting.
• Select SAVE (save the changes), QUIT (exit the setting mode
without saving) or PRESET (reset all the settings to the factory
defaults) from the EXIT menu and press ENTER to return to the
previous CAMERA SETUP menu.
You can't return to the previous menu while in the setting mode.
You can only return to the previous menu by selecting EXIT.
• Change the preset values for the other channels repeating the same
steps.
• Press the MENU button after completing all the settings to return
to the SETUP MENU.
CAMERA ID:
---CH1----("-" indicates blank.)
• Select "CAMERA ID" using the Rotary Wheel and press ENTER to
select the first "- ."
• Select the desired letter using the Rotary Wheel and press ENTER to
move on and select the next letter.
(Letter order: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ[
]~_ . / )
• Repeat the same to select all the desired letters. (You can choose up to
ten letters.)
Sets the Loss Detect On/Off. (ON ↔ OFF)
LOSS DETECT:
IRIS:
Controls the video output level through the Iris depending on the
level of light coming into the camera.
• Select "IRIS" using the Rotary Wheel and press ENTER to select
---CH1----
ON
ALC...
OFF
ATW
ONEAF
SAVE
Eng-10
either "ALC..." or "MANUAL...".
• ALC... : Auto Light Compensation
- Select "ALC..." using the Rotary Wheel and press the SET button to
display the following screen. Press the MENU button after complet-
ing the setting to return to the previous menu.
[ALC]
AREA
BLC
LEVEL[ 00 ]
- Select AREA using the Rotary Wheel and press ENTER to select
either "PRESET..." or "USER...".
- Select "PRESET..." using the Rotary Wheel and press the SET but-
ton to display the following screen. The back light compensation will
be applied to the area(s) with preset values.
[PRESET AREA]
Press the MENU button to return to the previous menu.
- Select "USER..." using Rotary Wheel and press the SET button to
display the following screen.
[USER AREA]
❙ Adjust the size up/downward using the Rotary Wheel and press
ENTER to select and move on to adjust the size on the left/right
side. Then " " will be displayed on the screen.
❙ Press ENTER after adjusting the size of the left/right side by using
the Rotary Wheel. Then you will be ready to adjust the position
up/downward and " " will be displayed on the screen.
❙ Press ENTER after adjusting the position using the Rotary Wheel.
Then you will be ready to adjust the position to the left/right side
and " " will be displayed on the screen.
❙ Press ENTER after adjusting the position using the Rotary Wheel.
Then you have completed the AREA setting. Press the MENU but-
ton to return to the previous menu.
- BLC (Back Light Compensation): When BLC is turned "ON,"BLC
function will be applied to all the areas set in AREA. When bright light
is in the background of an object, the object will appear dark on the
monitor due to the backlight. To address this problem, use the BLC
function so that you can get clear images.
- LEVEL: You may set the video output level from "-9" to "+9".
Select "LEVEL [00]" using the Rotary Wheel and press ENTER to
change the setting. Press ENTER after changing the setting to save the
setting.
PRESET...
OFF
----------+----------