1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. SMO-150QN
  6. User manual

Samsung SMO-150QN User Manual

Ez view kit:remote monitoring video surveillance system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EZ View Kit:Remote Monitoring
Video Surveillance SYSTEM
SMO-211QN, SMO-150QN
User Guide

Advertisement

Table of Contents
loading

Related Manuals for Samsung SMO-150QN

Summary of Contents for Samsung SMO-150QN

  • Page 1 EZ View Kit:Remote Monitoring Video Surveillance SYSTEM SMO-211QN, SMO-150QN User Guide...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  • Page 3 CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Graphic Symbol Explanation The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated ‘dangerous voltage’...

  • Page 4: Important Safeguards

    Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6. Attachments : Do not use attachments not recommended by Samsung as they may cause hazards. 7. Water and Moisture : Do not use this monitor near water. For example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.etc.
  • Page 5 The monitor may fall causing serious injury to a child or adult and serious damage to the appliance. Use only with a cart, stand, tripod, bracket or table recommended by Samsung or sold with the monitor. Any mounting of the monitor should follow Samsung’s instructions and should use a mounting accessory recommended by Samsung.
  • Page 6 13. Lightning : For added protection for this monitor during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the monitor due to lightning and power-line surges. 14.

  • Page 7: Fcc & Ices Information

    18. Replacement Parts : When replacement parts are required be sure the service technician has used replacement parts specified by Samsung or have the same characteristics as the original parts. Unauthorized substitutions may result in fire electric shock or other hazards.
  • Page 8 Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 9 The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD. America QA Lab of Samsung 3351 Michelson Drive, Suite #290, Irvine, CA92612 USA IC Compliance Notice This Class (A) digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

  • Page 10: Table Of Contents

    Contents IMPORTANT SAFETY INSTRUCTIONS ... 2 IMPORTANT SAFEGUARDS... 4 FCC & ICES Information... 7 Chapter 1: System Components and Installation 1-1) Environmental requirements for installation and safety ... 12 1-2) System Components... 13 1-3) STANDARD CAMERA composition and installation method(SOC-C120) ... 14 1-4) DOME CAMERA Composition and installation method(SOC-D120) ...
  • Page 11 3-5) TITLE MENU Function setting... 39 3-6) ALARM MENU Function setting... 40 3-7) NETWORK SETUP Function and setting method... 41 3-8) MONITOR Basic setting(SMO-211QN/SMO-150QN) ... 49 3-8-1) “LIVE” MENU... 51 3-8-2) System Configuration Menu... 64 3-8-3) Network Configuration Menu... 72 3-8-4) Monitor Set up ...

  • Page 12: Chapter 1: System Components And Installation

    Chapter 1: System Components and Installation 1-1) Environmental requirements for installation and safety This section describes the environmental requirements for safe installation and use. Install the product on a flat table or in a rack. It should be used only when level and should not be used when stood vertically or obliquely.

  • Page 13: 1-2) System Components

    (SOC-C120) (SOC-D120) CAMERA CAMERA CAMERA Corner Mount BRACKET BRACKET MODEL DESCRIPTION SMO-211QN 21" FLAT CRT MONITOR SMO-150QN 15" FLAT CRT MONITOR SOC-C120 WR(Standard) Camera SOC-D120 DOME Camera SOC-P120 PIR Camera SBR-110S STAND TYPE BRACKET BRACKET FOR PIR CAMERA MCB-60 6PIN SHIELD CABLE...

  • Page 14: 1-3) Standard Camera Composition

    1-3) STANDARD CAMERA composition and installation method 1) Standard Camera composition (SOC-C120) a. Lens It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. b. Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor.
  • Page 15 f. Speaker Outputs the sound signal. 2) INSTALLING STANDARD CAMERA (SOC-C120) SOC-C120 camera can be attached to the wall, ceiling or shelf using the camera mount bracket (SBR-110S). Choose an installation site that can sufficiently support the weight of the equipment to be installed. Attach the camera mount bracket to the wall or ceiling using the supplied three screws (M4 X L15).
  • Page 16 3) CAMERA MOUNT BRACKET(SBR-110) & STANDARD CAMERA(SOC-C120) (1) Overview CAMERA MOUNT BRACKET (SBR-110S) is used to attach the camera to a wall, ceiling or shelf. (2) Specifications Use : Indoor Installation : Wall or Ceiling Dimensions : 2.25 (W) X 1.86(H) X 3.95(L) inch Weight : 0.29 lbs Operating Temperature : 32°F ~ 104°F (3) Accessories...
  • Page 17 • Adjust the camera to target the video location and tighten the bracket handle on the camera mount bracket. Install the camera on to the male screw of the Camera Mount Bracket by rotating the camera clockwise. • Loosen the handle by turning it in a counter clockwise direction and then adjust the camera position .
  • Page 18 After positioning the monitor and installing four cameras in the desired location, please connect the CAMERA to the MONITOR using the CAMERA CABLE (MCB-60) as shown in the figure below. Connection status checking method : • Turn on the monitor after connecting cameras, and check if camera image is displayed. The monitor's initial screen mode is quad.

  • Page 19: 1-4) Dome Camera Composition And Installation Method(Soc-D120)

    1-4) DOME CAMERA composition and installation method (SOC-D120) 1) Dome Camera composition (SOC-D120) !@#$%^ a Fixed Focus Lens Keeps the camera's lens free from dust and dirt. b Lens Assembly c Camera Frame Supports the camera. d Dome Cover Clear plastic cover that protects the camera. Take care not to scratch the cover.
  • Page 20 2) INSTALLING THE DOME CAMERA (SOC-D120) • Attach the camera to the wall or ceiling using the supplied tap screws. Wall or ceiling Main body Screw Driver Tab screw • Adjust the video location by swiveling the camera (Lens assembly) up and down, and adjust the focus by turning the lens clockwise and counter clockwise.

  • Page 21: 1-5) Pir Camera Composition And Installation Method(Soc-P120)

    1-5) PIR CAMERA composition and installation method (SOC-P120) 1) PIR Camera composition (SOC-P120) <Top> <Bottom> ① Lens It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. ➁ Speaker It outputs the sound signal which transferred from the monitor. ➂...
  • Page 22 ➅ Function Switch A function switch for the PIR sensor operation. ⑦ PIR Sensor A thermal heat sensor that detects infrared radiation projected by warm objects. ⑧ Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor. ⑨...
  • Page 23 2) INSTALLING THE PIR CAMERA (SOC-P120) 1. Choose an installation site that can sufficiently support 5 times the weight of the equipment to be installed. 2. Remove the screw (BH M2.6) at the bottom of the main unit by turning it counterclockwise, and then lift the assy-case front as you push it upward to detach it from the case-rear.
  • Page 24 5. Align the two holes of the caserear to the holes of the plastic anchors, and then fasten the screw tappings (BH M3 X 30). 6. Adjust the direction of the lens. 1) Use a the philips head screwdriver to turn the screw (indicated by the arrow in the illustration) counterclockwise slightly.
  • Page 25 3) INSTALLING THE CAMERA USING THE CORNER MOUNT(SOC-P120) 1. Choose an installation site that can sufficiently support 5 times the weight of the equipment to be installed. 2. Place the corner mount to the corner to which you want to install the camera and mark screw holes with a pencil (indicated by the circles in the illustration).
  • Page 26 5. Connecting Cables 1) Connecting the RJ-11 cable to the RJ-11 connector on the case-rear and connect the camera cable to the cable terminal on the case- rear. 2) Pass the cables through the hole on the corner mount as shown in the picture to the right.
  • Page 27 8. Assemble the assy-case front onto the case-rear as shown in the illustration. Fasten the assy-case front to the case-rear with the screw (BH M2.6) you removed earlier. 3) CABLE CONNECTION (SOC-P120) • Connect the camera cable to the camera cable jack on the camera, then connect the other end of the cable to the monitor's channel input jack as shown in the illustration.

  • Page 28: 1-6) External Terminal Connecting Method For

    1-6) Camera and Monitor connections 1) External terminal connecting method for CAMERA PIR Sensor • An additional PIR sensor or external sensor can also be connected. • The additional PIR sensor can be connected as shown in the illustration above. •...

  • Page 29: 1-7) Whole System Connection And Configuration

    f) Not Used g) Connect the A/O (HOT) terminal on the rear panel to the Alarm IN terminal of the VCR. h) Connect the A/O (COLD) terminal on the rear panel to the Ground terminal of the VCR. i) Connect the A/R terminal on the rear panel to the Alarm Reset terminal of the VCR. j) Connect the G (ground) terminal on the rear panel to the Ground terminal of the VCR.

  • Page 30: 1-8)Total System Configuration

    1-8)Total System Configuration Eng-30...

  • Page 31: 1-9)Local System Configuration

    If you have a Static (Fixed) IP line or Dynamic IP line (Cable Modem or DSL Modem) with one IP address (whether its dynamic or fixed), but have more than one internet device to use (such as a PC and a SMO-211QN/SMO-150QN or several SMO-211QN/SMO-150QN);...

  • Page 32: Chapter 2: Monitor Front Panel Key Function And

    Chapter 2: MONITOR FRONT PANEL KEY Function and Operation Front Panel 2-1) TALK KEY The TALK KEY allows voice signal tobe transmitted to an intended camera with built-in MIC on the front of the monitor. For this function, select a target camera with the ▲/▼ key on the FRONT PANEL, and press AUD/SP SEL KEY.

  • Page 33: 2-4) Screen Save- Key

    2-4) SCREEN SAVE - KEY Allows users to set the monitor's SCREEN SAVE MODE. The PICTURE screen is off when the SCREEN SAVE KEY is pressed. Users can exit from the SCREEN SAVE MODE by pressing the SCREEN SAVE BUTTON again. SCREEN SAVE MODE is automatically cancelled and picture is “ON”...

  • Page 34: 2-8) Pip- Key

    2-8) PIP- KEY Can be used to see the main screen while Single screen is displayed. The main screen can be changed and transfered to another channel while in PIP mode. Please refer to "CHAPTER 4. DISPLAY MODE setting method(Eng-88)" for PIP function and details. 2-9) FREEZE- KEY This key allows users to see a target camera picture in the PAUSE MODE.Select a camera with the ▲/▼...

  • Page 35: 2-13) Enter- Key

    2-13) ENTER- KEY Enter key allows users to: 1.Enter set up menu and setting mode 2.Display single camera picture 2-14) UP/DOWN KEY Allows users to 1.Change camera channel 2.Select set up menu movement and setting mode UP: Increase items DOWN: Decrease items 2-15) LEFT/RIGHT KEY Allows users to set date LEFT: Decrease Date...

  • Page 36: 3-1) Adjust Menu Function And Setting Method

    Chapter 3: Setting each item function in the SETUP MENU Pressing the FRONT PANEL MENU button allows users to enter SETUP MENU and see the following menu OSD box. Setting method of each SETUP MENU function and operation is as follows. 06/01/03 SETUP MENU...

  • Page 37: 3-2) Date/Time Menu Function Setting

    3-2) DATE/TIME MENU Function setting • Function: Sets the display date format and current time. Setting method: Move to #2. DATE/TIME MENU by using ▲/▼ KEY at setup menu, then press • the ENTER SWITCH to display the OSD as shown in the below figure below. (The figure shows the initial setting status.) 06/01/03 DATE/TIME SETTING...

  • Page 38: 3-4) Display Menu Function Setting

    If the time is set for each camera channel by using ▲/▼ KEY, each camera picture will be displayed for the set time and switched to the next picture automatically. 3-4) DISPLAY MENU function setting • Function: Allows users to select the color and ON/OFF of borderline at QUAD DISPLAY. •...

  • Page 39: 3-5) Title Menu Function Setting

    3-5) TITLE MENU Function setting • Function: Set the desired title of each camera. Setting method: Move to #5. TITLE MENU by using ▲/▼ KEY in the SETUP MENU, and press • the ENTER SWITCH to display the OSD as shown in the figure below. (The figure shows the initial setting status.) 06/01/03 TITLE...

  • Page 40: 3-6) Alarm Menu Function Setting

    3-6) ALARM MENU Function setting • Function: Allows users to set the ALARM MODE for each camera. Setting method: Move to #6. ALARM MENU by using ▲/▼ KEY in the SETUP MENU, and • press the ENTER SWITCH to display the OSD as shown in the figure below. (The figure shows the initial setting status.) 06/01/03 ALARM...

  • Page 41: 3-7) Network Setup Function And Setting Method

    3-7) NETWORK SETTING function and setting method This section of the manual is intended for users who will install this security system in a network environment.If you have difficulty setting the network,we recommend contacting your network administrator. • Static • DHCP •...
  • Page 42 SMO-211QN/SMO-150QN, Such as http://192.168.1.200 * Note : HTTP Port Set the port to be used when connection to SMO-211QN/SMO-150QN in Internet Explorer and receive the necessary files for image transmission. Necessary files for the image transmission. The port setting is used for various network configuration or a particular port etc.
  • Page 43 DHCP User - Constituted by Dynamic IP on the cable/xDSL modem network You can use the SMO-211QN/SMO-150QN products through the network using Dynamic IP on cable/xDSL modem. In this case, it should be connected with DDNS to support the Dynamic IP.
  • Page 44 On completion of the DHCP setup, the screen, [D] is displayed. If the network connection is cancelled or cut, [D] starts blinking. 6) You can view the video source of the SMO-211QN/SMO-150QN from a remote location 7) Make sure the remote PC meets the minimum specification requirements described in Chapter 5.
  • Page 45 8) Open your Internet Explorer web browser, type in the following in the URL window and press Enter. http://sff0000.websamsung.net Where ff0000 is the MAC address of your SMO-211QN/SMO-150QN in this example. If your SMO-211QN/SMO-150QN’s MAC address is ff0001, then type in ff0001 instead of ff0000 * Note : MAC Address.
  • Page 46 In case of a configuration using PPPoE, SMO-211QN/SMO-150QN connection is made through the domain names (EX : http://sff0000.websamsung.net) that are automatically registered in Samsung's DDNS server. You do not need to enter IP address, Subnet Mask and Gateway in the network tab of Admin Mode.
  • Page 47 DSL Service Provider. CAUTION When using DSL (ISP-internet service provider) you must type correct User Name and Password to connect to SMO-211QN/SMO-150QN. If you type an incorrect User Name or Password, commection is impossible. ID and PASSWORD 5) USER ID and PWD (Password)are limited to 40 digits maximum.
  • Page 48 10) You can view the video source of the SMO-211QN/SMO-150QN from a remote location 11) Make sure the remote PC meets the minimum specification requirements described in Chapter 5. Each product feature (Eng-91), and make sure that the PC is internet capable and set up to able to browse the internet.

  • Page 49: 3-8) Monitor Basic Setting(Smo-211Qn/Smo-150Qn)

    Since the connection is not available, as the IP is not received from DSL communica- tions, please reboot by turning off the power of DSL Modem and SMO-211QN/SMO-150QN for more than 5 seconds,and then try to connect again. 3-8) SMO-211QN/SMO-150QN basic setting 1) Open your Internet Explorer web browser, type in the Monitor's IP address: http://sff0000.websamsung.
  • Page 50 4) Click YES . This will automatically download the necessary Active X Controls to operate the Remote Viewer. It takes about 20 seconds at the first connection. 5) When you enter properly, a window appears as shown below. Note:If the MPEG 4 codec is improperly installed, you will not see video images. To see video, click on Dual Quad Viewer in the upper left portion of the screen, then a window will appear prompting you to install MPEG 4.

  • Page 51: 3-8-1) "Live" Menu

    3-8-1) “LIVE” MENU - CAMERA SELECT Initial display mode of monitor if QUAD A. - Remote Viewer Function Buttons KEY Type & $ & Function Choose a camera by channel Ch 1 ~ Ch 8 4 Cameras are supplied. You can connect 4 additional cameras if desired.
  • Page 52 - SINGLE SCREEN DISPLAY If users want to see the camera image at full mode,or smaller mode, Select a target camera with NEXT channel or CHANNEL SELECT keys. After camera selection, camera image can be displayed at full screen. Original Size Large Size - QUAD MODE DISPLAY A user can select the QUAD mode.
  • Page 53 - Auto SEQUENCY DISPLAY MODE Press the sequence key in the single or QUAD mode to display the screen in sequence. If the DWELL TIME SETTING of SETUP MENU is set to 3 seconds and the SEQUENCY KEY is pressed at this time, the operation will be carried out as follows. (NO signal channel will be skipped while single screen is auto-switching) * SINGLE MODE SEQUENCE DISPLAY ->...
  • Page 54 An user can change the name of file or folder by use of the save key ( of Viewer. If you are connected to and recording from more than one SMO-211QN/SMO-150QN on the same PC, there will be more than one “Server Name” directory.
  • Page 55 2. PLAY When you select play and double click the file, that file will play back on the Remote Viewer as a motion clip. You can select several files simultaneously at once (up to 10) and the files will be played back in the order of the file name (by date and time). Eng-55...
  • Page 56 - Player installation/execution/deletion - Installation Player will be installed together when it is connected to SMO-211QN/SMO-150QN. - Execution (Follow the instruction to execute it separately.) Click Start —> Program —> Smart Webviewer For WEB-MON —> Player. (Fig. 3 ) FIG.3 - Deletion Click Start —>...
  • Page 57 - Program screen configuration - How to play 1. Playback File - Open... Selecting this, you can choose between fmp4(moving image file) or fmpi(still image file) in the window as shown below. Eng-57...
  • Page 58 Having chosen and opened a file, you will see a picture as shown below. Reverse playback Playback Pause Stop To the back frame To the front frame Speed control Enlarge Reduce Original size Save the present frame as a Print Display the playback speed, Status magnification, and information...
  • Page 59 - Snap shot Save the present image as a form of fmpi file. Select in the toolbar. The result will be as follows. Type in the file name and press ‘Save’ to store it as a fmpi file. - Print Prints the present image.
  • Page 60 Type in the phrase you added in ‘Description’. Then press the ‘OK’ button. Select Print and press ‘OK’. Eng-60...
  • Page 61 The following pages are geared towards advanced users who function as network adminid- trators, and will be using the system in a network environment. It is an administrator’s menu to set the general items on SMO-211QN/SMO-150QN Server. To use this menu, you need the administrator’s ID and Password.
  • Page 62 Enter key to execute the Admin Menu as shown below. 4) Screen configuration ! : General menus of Admin Menu. The menus related to SMO-211QN/SMO-150QN Server are divided into System, Network, Monitor Setup, and Utilities in the main. Each of them has several sub menus.
  • Page 63 Admin Menu Structure • Category System Configuration Network Configuration Monitor Setup Utilities Main Menu System Information Admin. Password Access Limitation User Registration Video Alarm Notification Network Configuration PPPoE (DSL) Network Ports View Network Status Network Status Notification DDNS Configuration Date & Time View Event Log Display Dwell Time...

  • Page 64: 3-8-2) System Configuration Menu

    Server name can be changed if desired. - Menu Configuration Server Name Type in the name of the SMO-211QN/SMO-150QN Server. * Server’s name should be composed of 19 or less numerals or English alphabetical letters. It cannot start with a numeral and should start with a letter.
  • Page 65 2. Admin Password In this menu, the administrator (root) password can be changed. - Menu Configuration Administrator’s ID Administrator’s ID is always “root”. Old Password The initial password is “root”. New Password Type the new password. * The password should be composed of 4-8 digit numerals or alphabets.
  • Page 66 3. Access Configuration This menu is to set the targets the SMO-211QN/SMO-150QN Server can have a access to. - Menu Configuration Access Limitation This is to set limit for the frame speed for users who are registered in the system, to join and view images.
  • Page 67 4. User Registration This is a user control menu to register, change, or delete the users who may have access SMO-211QN/SMO-150QN Server. Eng-67...
  • Page 68 - Menu Configuration User ID Set the ID you want to register. Password Set the password you want to register. Confirm Type again the password you want to register. Password Full Name Type in the name you want to register. This is a menu to register a user.

  • Page 69: Menu Configuration

    5. Video Configuration This is to set the data to be added in the video configuration and set an environment for each channel. - Menu Configuration Image Size This is to choose the size of the video data image . You can choose between 2 size (Small / large).
  • Page 70 - Menu Configuration Service Choose enable if you want to send the ALARM notifying E-MAIL. SMTP server SMTP server of the ISP that provides SMO-211QN/SMO-150QN with address services. ISP’s confirmation required. Authentication Choose enable if you want to log in the SMTP of the ISP Login providing SMO-211QN/SMO-150QN with services.
  • Page 71 EX) When user who has an e-mail address (SMO-211QN@yahoo.com) and password(123456) in YAHOO, sets “Alarm Notification” in order to send a mail to (test1@yahoo.com). After completing setting, click Apply button. image transfer in your e-mail account. In the event of Alarm, please use PLAYER to catch normal JPEG images. Otherwise, the image size will be reduced to a half JPEG size.

  • Page 72: 3-8-3) Network Configuration Menu

    3-8-3) Network Configuration Menu. 1. Network Configuration On this menu, you can fix the general environment related to the network of the SMO-211QN/SMO-150QN Server and check the present status. - Menu Configuration Network Configuration PPPoE(DSL) Network Ports View Network Status...
  • Page 73 1-1. Network Configuration : Static IP / DHCP Client 1) If the IP of the SMO-211QN/SMO-150QN Server is Static : Choose “Static IP”. 2) Type in the IP Address you want to assign to the SMO-211QN/SMO-150QN Server, NetMask, GateWay, DNS1, and DNS2 addresses.
  • Page 74 * Note : MAC Address. Locate the MAC Address of the SMO-211QN/SMO-150QN (each SMO-211QN/SMO-150QN has its own unique MAC address). It can be checked in “3-7) NETWORK SETUP function and setting method (Eng-41)” of SETUP MENU. It is the last 6 digits as shown below.
  • Page 75 * Note : When connecting DSL, ID & PASSWORD are limited to 40 characters. into an IP address (ex. 216.109.127.28). The SMO-211QN/SMO-150QN Server uses this service to join the FTP server or other webs by the Domain Name. DSL service supports only PPPoE (Point to Point over the Ethernet).
  • Page 76 3. Network Ports Configuration It sets the HTTP Port number to use when the SMO-211QN/SMO-150QN Server communi- cates with a Client PC. The present SMO-211QN/SMO-150QN Server uses HTTP Port (80). - HTTP Port 1) This is the port the Client PC uses to connect to the web page of the SMO-211QN/SMO- 150QN Server.
  • Page 77 The existing setting will be recalled if you press Reload button. 5. Network Status Notification When there is a change in the setting status of the SMO-211QN/SMO-150QN Server, it sends e-mails to the people who want it. Set Mail Notification to “Enable” to send the net- work setting status of the SMO-211QN/SMO-150QN Server to the specified e-mail address- es in the cases as follows.
  • Page 78 1) DHCP Client has been set in “Network Configuration” menu and an IP has been assigned from the actual DHCP Server to make communication possible. 2) PPP Client has been set in “PPPoE” menu and communication has become possible through the connection with ISP or PPP Server. - Menu Configuration Mail Notification E-mail forwarding or not.
  • Page 79 “Network Status Notify” in the Network Configuration group. Choose to use the Mail Notification function or not. Choose “Enable” if you want to notify the network status of the SMO-211QN/SMO-150QN Server to people who through e-mails. Type the address of the SMTP Server.
  • Page 80 In case of a configuration using DHCP, as the connection to SMO-211QN/SMO-150QN is made using domain names (EX : http://sff0000.websamsung.net) that are automatically reg- istered in Samsung's DDNS server, IP address, Subnet Mask and Gateway that are in the net- work tab of Admin Mode are not necessarily to be inputted.

  • Page 81: 3-8-4) Monitor Set Up

    3-8-4) Monitor Set up - Menu Configuration Please refer to CHAPTER3 of the user’s manual. Date & Time Set the display data format and current time. View Event Log Display the time and data of camera event and type of event. Dwell Time Displays each picture for pre-set time and automatically Switches it to the next picture in SEQUENTIAL DISPLAY MODE.

  • Page 82: 3-8-5) Utilities

    - Menu Configuration Save Configuration Reboot System Update Save Configuration is required to save all new configuration in the system. System reboot is strongly recommended to apply all new configurations properly to the SMO-211QN/ SMO-150QN system System Update Eng-82...
  • Page 83 1. Save Configuration This menu is to save all of the present setting in the Flash Memory. If you changed any of the settings for the SMO-211QN/SMO-150QN, it is recommended that you save it in the Flash Memory in this menu.
  • Page 84 2. Reboot This menu is for the rebooting of the system. It is better to reboot the system if you change the setting and update the flash. 1. Click “Reboot” in the utilities group. 2. Click “Reboot!!!”. Eng-84...
  • Page 85 4. System Update This menu is to update the inner programs and data of the SMO-211QN/SMO-150QN Server. They are recorded in the Flash Memory and composed of 4 parts called Kernel Image, Ram disk Image, System Image, and Web Image respectively.
  • Page 86 3-2. All (kernel, RAM disk, System, Web) Update When you click the start button located, a window will appear to ask if you want to update. Click “Cancel” to stop updating. 1. “OK” to proceed updating. 2. A pop-up window will appear. Choose “Zimage-ve” in the browser. Eng-86...
  • Page 87 3. Click “Next” button to move to the next stage. Click “Skip” button to move to the next stage without Kernel Image’s update. Click “Next” button and a window will appear to check the name and size of the file. Eng-87...
  • Page 88 Click Previous button to go back to the previous stage. Click the Next button to execute update of the program and move to the next stage. Click the Cancel button to stop the update process. 4. In the next stage, a pop-up window will appear for the file searching for the RAM Disk Update.
  • Page 89 5. Click “Next” button to move to the next stage. Click “Skip” button to move to the next stage without Kernel Image’s update. Click “Next” button and a window will appear to check the name and size of the file. Click “Previous”...
  • Page 90 6. In the next stage, a pop-up window will appear for the file searching process for the System Image Update. Choose “fw_2pq-ve.tar.gz” in the browser. 7. Click “Next” button to move to the next stage. Eng-90...
  • Page 91 Click “Skip” button to move to the next stage without kernel Image’s update. Click “Next” button and a window will appear to check the name and size of the file. Click “Previous” button to go back to the previous stage. Click the Next button to execute update of the program and move to the next stage.
  • Page 92 9. Click “Next” button to move to the next stage. Click “Skip button to move to the next stage without Kernel Image’s update. Click “Next” button and a window will appear to check the name and size of the file. Click “Previous”...
  • Page 93 Click the reboot button and press the confirmation button to reboot the system. 11. Close your web browser and wait for about a minute before you log in again Files related to the update of SMO-211QN/SMO-150QN Kernel Image RAM Disk Image...

  • Page 94: 3-9) View Event Log Menu Function And Setting Method

    3-9) VIEW EVENT LOG MENU function and setting method • Function: Displays the time and date of camera event and type of event. Setting method:Move to #7. VIEW EVENT LOG MENU by using œ œ ENTER√ √ • SWITCH at SETUP MENU, then press the ENTER SWITCH to display the OSD as shown in the figure below.

  • Page 95: Chapter 4: Display Mode Setting Method

    Chapter 4: DISPLAY MODE setting method 4-1) SINGLE SCREEN DISPLAY Initial display mode of monitor is QUAD - A. If you want to see the camera image at full mode, select a target camera by using ▲/▼ KEY. After that, press the ENTER SWITCH and selected camera image will be displayed at full screen.

  • Page 96: 4-2) Quad Mode Display

    4-2) QUAD MODE DISPLAY Users can switch SINGLE DISPLAY MODE and SEQUENTIAL DISPLAY MODE to QUAD DISPLAY MODE, or QUAD - A (QUAD - B) to QUAD - B (QUAD - A), or PIP MODE to QUAD MODE, press the QUAD/PAGE KEY. * QUAD MODE display from SINGLE MODE or SEQUENCE MODE, 06/01/03 CH3 DISPLAY...

  • Page 97: 4-3) Auto Sequential Display Mode

    4-3) AUTO SEQUENTIAL DISPLAY MODE Pressing on the SEQUENCE KEY on the front allows screen to automatically switch to SINGLE MODE full screen or QUAD MODE. (‘no-signal’ channels will be skipped while single screen is auto-switching.) If the DWELL TIME SETTING of SETUP MENU is set to 3 seconds and the SEQUENCE KEY is pressed at this time, the operation will be carried out as follows.

  • Page 98: 4-4) Pip Mode Display

    4-4) PIP MODE DISPLAY Can be used to see PIP screen in Single screen mode. If you press the SEQUENCE on PIP screen ,the Sub- screen will change. If you press the ▲/▼ KEY,the main screen can be transferred to another channel. Sub-screen location can be selected in DISPLAY MENU in SETUP MENU.

  • Page 99: 4-5) Zoom Mode Display

    4-5) ZOOM MODE DISPLAY When users want to see a zoomed image of a specific area of the display, press the ZOOM KEY in the front to display zoom selection area. Select zoom target area by using ▲/▼ KEY, and press the ENTER SWITCH, then, the selected area will be displayed at full single mode with zoomed area doubled.In the zoom function operation in SINGLE DISPLAY MODE (CH2), the operation will be carried out as shown in figure below.

  • Page 100: Soc-C120 (Standard Camera)

    Chapter 5: Product features SOC-C120 Model Name NTSC STANDARD Broadcasting System 1/4 ”SUPER HAD IT CCD Imaging Device 510(H) x 492(V) Effective Pixels S Internal Synchronization H :330 TV Lines, V: 350 TV Lines Resolution VBS 1.0Vp-p(75ohms composite) Signal Output ≤...

  • Page 101: Soc-D120 (Dome Camera)

    SOC-D120 : Dome Camera Model Name SOC-D120 Broadcasting System NTSC STANDARD Imaging Device 1/4 ”SUPER HAD IT CCD Effective Pixels 510(H) x 492(V) Synchronization Internal Resolution H :330 TV Lines, V: 350 TV Lines VBS 1.0Vp-p(75ohms composite) Signal Output ≤ 48 dB S/N Ratio 2lux(F2.0, 50 IRE) Minimum Scene Illumination...

  • Page 102: Soc-P120 (Pir Camera)

    SOC-P120 : PIR Camera Model Name SOC-P120 Broadcast System NTSC Standard Imaging Device 1/4" Color IT CCD Effective Pixels 510(H) X 492(V) Synchronization Internal Resolution H :330 TV Lines, V: 350 TV Lines Signal Output VBS 1.0 Vp-p (75 ohms composite) S/N Ratio ≤...

  • Page 103: Observation Monitor

    OBSERVATION MONITOR • CAMERA 8 Input: 1.0Vp-p(CVBS), 75Ω (vertical) Video Input • VCR 1 Input (to Video Out of VCR) : 1.0Vp-p, 75Ω (vertical) • VCR 1 Output: 1.0 Vp-p, 75Ω (vertical), S-Jack Type, CVBS Video Output Audio Input • CAMERA 8 Input: •...

  • Page 104: Network

    NETWORK Hardware Network Protocols Image Compression & Quality Video Format Video Resolution Performance Management LAN Interface Security Function PC Specification • 32bit Embedded Processor • Flash Memory : 8Mbytes • SDRAM : 32Mbytes • HTTP, TCP/IP, FTP, Telnet, ARP, PPP, DHCP, PPPoE •...
  • Page 105 If the administrator setting and monitoring may not be available due to conflicting unregistered MAC addresses, please contact a local service center or head office. SMO-211QN/SMO-150QN enables users to see up to four viewers on one computer. The system may malfunction if over five viewers with low performance computers are connect- ed to the device.

  • Page 106: Appendix A) Software Up Data

    Appendix A) Software up data The initial screen of Samsung Electronics’ web site is as follows. 1. http://www.securitysamsung.com http://www.samsung.com/Products/CCTV.htm 2. Network Security in Homepage 3. Download the following items for SMO-211QN/SMO-150QN. ! Owner’s manual - SMO-211QN/SMO-150QN Owner’s manual @ UP-GRADE S/W - kernel, RAM disk, System, Web...

  • Page 107: Appendix B) Ip Router Setup Guide

    List of Routers compatible with SMO-211QN/SMO-150QN. Refer to Router User’s Manual for the detailed router setup. Step-by-Step Examples : Linksys (Model : WRT54G) Netgear (Model : WGR614v4) D-Link (Model : DI-624+) SMC (Model : 7004VBR) CAUTION Other routers may be incompatible with SMO-211QN/SMO-150QN. Eng-107...

  • Page 108: Step-By-Step Examples Of Ip Router

    Step-by-Step Setup Example of IP Router Linksys model WRT54G 1. Click the “Application and Gaming” tab. 2. Click “Port Range Forward”. 3. Port forwarding Row #1 : ! Application : Set this to “HTTP” @ Start and End : Set both to “From 10000 to 65535” # Protocol : Select “TCP”...
  • Page 109 2. Click the WAN and LAN Port information. Write down the WAN Port IP Subnet Mask number and the LAN Port IP Address number. You will need it later when setting up the SMO-211QN/SMO-150QN. 3. Click “Advanced” and “Port Forwarding”...
  • Page 110 Step-by-Step Setup Example of IP Router D-Link model DI-624+ 1. Select “Virtual Server” and “Advanced” You need to create Virtual Servers (Port Forwarding) for HTTP, TCP and Upgrade separately. 2. Virtual Server (Port Forwarding) for HTTP ! Enabled : Leave this “checked” @ Name : Set this to “HTTP”...
  • Page 111 Step-by-Step Setup Example of IP Router SMC model 7004VBR 1. Select “NAT” and “Virtual Server” You need to create Virtual Servers (Port Forwarding) for HTTP 2. Virtual Server (Port Forwarding) for HTTP : use the first empty ID row. ! IP Address : SETUP MENU -> 7. NETWORK SETUP -> Check IP from network status to apply it identically to Private IP after DHCP setup.
  • Page 112 HEADQUARTERS 105 Challenger Road Ridgefield Park, NJ 07660-0511 TEL:1-800-SAMSUNG SERVICE DIVISION 400 Valley Road,Suite 201 Mount Arlington, NJ 07856 1-800-SAMSUNG(1-800-726-7864) www.samsung.com Part No.: AA68-03602A-01 Printed in China...

This manual is also suitable for:

Smo-211qn

Table of Contents