Table of Contents
Advertisement
Deleting a scalable partition
60
User's Guide
g. If 12 PCI-X slots are available to port A, select Primary Scalable Node, Port
B for the RXE Port A destination. If six PCI-X slots are available to port A
and six PCI-X slots are available to port B; then, select Primary Scalable
Node, Port A for the RXE Port A destination and Primary Scalable Node,
Port B for the RXE Port B destination.
8. Select Write Scalable Partition Settings and follow the prompts to exit the
menu item.
9. Save and Exit the Configuration/Setup Utility Program.
Note: See the software documentation that comes with your operating system
to install your operating system.
Complete the following steps to delete the scalable partition:
1. Start the Configuration/Setup Utility on the primary server.
2. From the main menu, select Advanced Setup.
3. Select Scalable Partition Settings.
4. Select either Delete ALL Scalable Partition or Delete ONLY Local Scalable
Partition.
Note: Do not select Write Scalable Partition Settings when you delete the
scalable partition.
5. Exit the Configuration/Setup Utility program.
6. Turn off the servers.
7. If necessary, remove the SMP Expansion cables and reconnect them according
to your new configuration. See "Conecitng the cables" in the Option Installation
Guide on the Documentation CD.
8. Restart the servers.
Advertisement
Table of Contents
