Remote Console Redirection - Samsung SMARTSERVER 370 User Manual

Remote console redirection

From the Devices and I/O Ports choice, you can enable and configure the remote
console redirection through the Remote Console Redirection submenu. The
Devices and I/O Ports choice is on the full Configuration/Setup menu only.
Complete the following steps to enable and configure the remote console
redirection feature:
1. Ensure that you have installed and enabled the serial port that comes with your
server. See "Installing the serial port" in the Installation Guide.
2. From the Devices and I/O Ports choice, use the Up Arrow and Down Arrow
keys (↑ and ↓) to select Remote Console Redirection; then, press Enter. The
Remote Console Redirection window opens.
3. In the Remote Console Redirection window Enable the remote console
redirection and enter the necessary settings for the server to work with a remote
console.
Note: The remote console settings must match those in the Remote Console
Redirection window to ensure proper operation.
4. Once you have made the necessary changes, press Esc.
5. Select Save Settings; then, press Enter.
6. Confirm your selection; then, exit the Configuration/Setup Utility program.
7. Connect the server to a remote console using a null modem cable.
Chapter 2. Configuring the server
23