DIGITAL VIDEO RECORDER
GB
(4) SCSI ERASE (SCSI HDD Recording Deletion Mode Setup)
SCSI ERASE in the BACKUP SET UP menu is used to erase all the image signal backed
up in the SCSI HDD. Press the JOG(
until SCSI ERASE is highlighted. Then, if you press the SET/STILL(
system will start erasing the image signal while the screen turns yellow.
DELETE FILES 42% indicates 42% of the image signals in the SCSI HDD has been
deleted so far. Upon completion, the system converts to the LIVE screen automatically.
[OFF/ON]
Reference
-SCSI Backup Speed : 3MByte/sec
Ex) How long does it take to back up the image data with 10 minite lap time in the SCSI HDD if
the data was recorded in;
1)VERY HIGH/60 FIELD : 10 min.
2)HIGH/60/ FIELD : approx. 7 min.
3)NORMAL/60 FIELD : approx. 5 min.
4)NORMAL/30 FIELD : approx. 2.5min.
5)LOW/30 FIELD : approx. 2min.
3-31
) or UP( ), DOWN( ) button to move the cursor
) button, the
ERASE SCSI DATA
DELETE FILES 42%