Samsung SHR-2040P User Manual page 64

SHR-2040/2041/2042 USER'S MANUAL
[Video Out]
When setting the Composite Output, VGA output does not come out.
When setting the VGA Output, Composite Output does not come out.
If you press the No. 1 button for 5 seconds in the Live Mode with keeping the MODE button
pressed, the system will change from VGA to COMPOSITE or from COMPOSITE to VGA and
reboot.
[1 CH support]
In the case of 1 CH support, the event monitoring, Spot out channel, Spot out event
monitoring cannot be set.
Full D1/Half D1/ CIF is supported for the video size in the 1 CH.
If the Full D1 is set and 1 CH support Off is selected, the video size in the 4 CH set to CIF.
In the 1 CH setup, the system value is initialized.
5-17
Monitor
You are not allowed to connect VGA OUT and Composite/S-Video OUT simultaneous-
ly. Consequently, the user is obliged to choose either Composite Output or S-Video
Output.
Composite : Makes the output come out through the "Composite / S-Video OUT" port.
VGA : Makes the output come out through the "VGA Out" port.
When changing the output from Composite to VGA or from VGA to Composite, the
system reboots automatically.
1 CH Support
1 CH DVR is supported. If 1 CH Support is On, 1 CH is supported. If 1 CH Support is Off,
4 CH is supported.
If 1 CH Support is On, a set reboots and support 1 CH.
Caution
Caution