Bunker Hill Security 95153 Setup Instructions page 4

Camera
Stand (2)
1. Twist the Camera Stand (2) into the Wall Bracket (1). Tilt-up the Pivoting Screw.
See Figure 1.
Camera
Housing (3)
Pivoting Screw
Camera
Stand (2)
2. Screw the Pivoting Screw into the housing of the Camera. Be sure it is secure.
See Figure 2.
3. To make the Camera look more authentic, tuck the Wires (4) into the holes in the
Camera Stand (2). See Figure 2.
Note: Turn pivot screw 90° if wall bracket is mounted on a vertical surface.
SKU 95153 For technical questions, please call 1-800-444-3353
ASSEMbly
Wall Bracket (1)
FIgURE 1
FIgURE 2
Pivoting Screw
Wires (4)
Page 4