Advertisement
Caution
Drawing of complete installation
Production Dimension
Cutout Dimension
Make an air hole with 560(W) X 80 (D) in size needed for combustion in the upper rear plate. If you don't
have this air hole, it could have negative effect on the performance of product.
Construction work must be done by a licensed builder. In particular, for
gas connection, you must consult with a gas supply agency or licensed
installation agency.
To use this product correctly and prevent any potential risk, read
constuction manual then follow instructions.
You must wear gloves when installing product.
R20 or Less
+2
285
- 0
600 or More
560
Air Vent
+0
65
- 1
Upper Front
Countertop
Gas Connector
600 or More
+0
+2
65
480
- 1
- 0
Air Vent
Advertisement
