Table of Contents
Advertisement
Divert
You can set the conditions for which calls
are diverted to your mailbox or other
numbers.
¢
¢
Setup
§Menu§
¢
Select a function.
Set up call divert (example)
All calls
All calls are diverted.
top line of the display in standby mode.
Unanswered calls
Includes Unanswered,
No
reply,
Busy
J
¢
¢
Set
§Select§
number to which the call should be di-
¢
verted)
§OK§
After a short pause, the setting is con-
firmed by the network.
Status check
After a short pause the current informa-
tion is shown.
p
Condition set.
o
Not set.
Display, if status is unknown
(e.g. on a new SIM card).
Clear all
All set diversions are cleared.
Clock
¢
¢
Setup
§Menu§
¢
Select a function.
Divert
n
is shown in the
Not
reachable,
(Enter the phone
Clock
Security
¢
§Menu§
¢
Direct call
Only one phone number can be dialled.
Press and hold control key on the right (p. 5).
This SIM only
b
Your phone is prevented from being used
with a different SIM card.
Barrings
b
Network barring restricts the use of your
SIM card.
All outgoing calls: Outgoing calls, except
emergency 999 calls, are blocked.
Outgo internat: Only national calls can be
made.
Out.int.x home: International calls are not
permitted, except for calls to your home
country.
All incom. calls: The phone is blocked from
receiving all incoming calls.
When roaming: You do not receive any calls
outside your home network.
Status check: Query the status of your bar-
rings.
Clear all: Clear all barrings. Password pro-
b
tected!
Phone identity
The phone identity number (IMEI) is dis-
played.
Master reset
The phone is reset to the default values
(does not apply to SIM card and network
settings).
Alternative input in standby mode:
*
# 9 9 9 9 #
Setup
¢
Setup
Security
Select a function.
A
9
b
b
Advertisement
Table of Contents
