Internal Lan (Rj-45) Port; Headphones Socket; Power Adapter Socket; On/Off Button - MAXDATA PRO 6100 IW User Manual

Internal LAN (RJ-45) Port

The RJ-45 port is used to connect the internal Fast Ethernet (10/100/1000 Base-T/Tx) to a
Local Area Network (LAN) in your office or home, or broadband devices such as a cable
modem, DSL, or satellite internet. If your notebook has internal LAN capability you will
probably need to configure your notebook to work with your particular network. (To properly
set up your LAN environment, consult with a networking professional. Please refer to your
network administrator for information on your network configuration.)
To connect a LAN cable:
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated firmly in place.
3. Plug the other end of the cable into a LAN outlet.

Headphones socket

You can connect headphones or portable computer loudspeakers to your notebook via the
headphones socket. Your audio device must be equipped with a 1/8" (3.5 mm) stereo mini-
plug for it to work with the Port Replicator.
To connect an external audio source:
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated firmly in place.

Power adapter socket

You can connect the notebook's power adapter here. Power is then supplied to the notebook
via the port replicator.

On/off button

When the notebook and port replicator are connected, the on/off button on the port replica-
tor has the same function as the on/off button on the notebook.
90 Port Replicator