Panasonic KX-TG6411FX Operating Instructions Manual page 23

TG6411-6421FX(e).book Page 23 Friday, February 27, 2009 11:44 AM
Top-menu Sub-menu 1
*1
Base Unit Setup Ringer Volume
<Medium>
>
Dial Mode
<Tone>
Privacy Mode
<Off>
Recall/Flash
<600 msec.>
Base Unit PIN
<0000>
Repeater
<Off>
Country
<Other>
*1, *9
Caller Barred
7
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select "Caller ID". To turn this feature off, select
"Manual". (Caller ID subscribers only)
To use this feature, set the date and time first (page 16).
*3 When the ringer volume is turned off, ~ is displayed and the handset does not ring
for outside calls.
However even when the ringer volume is set to off, the handset rings:
– at the low level for alarm (page 25) and intercom calls (page 42)
– at the high level for paging (page 42)
*4 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2007
Copyrights Vision Inc.
*6 The default display language will be as follows if you select the following regional
codes when changing the unit's region setting (page 25):
*7 Turn this feature off if you prefer not to hear key tones while you are dialling or
pressing any keys, including confirmation tones and error tones.
*8 If you subscribe to a Caller ID service and want to view the caller's information
after lifting up the handset to answer a call, turn off this feature.
Sub-menu 2
*9
–
–
*10
–
*11, *12
–
–
–
–
– –
Programming
Page
–
16
–
18
25
28
25
26
23