Panasonic Viera TX-L32X5B Operating Instructions Manual page 10

Indicator / Control panel
5 6 7
1 Function select
[Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass] /
[Treble] / [Balance] / [Auto Setup] (p. 38)
[Music] or [Speech] mode in the Sound Menu
2 Channel Up / Down, Value change (when using the
F button), Switching the TV on (press either button
for about 1 second when in Standby mode)
3 Changes the input mode
4 Standby On / Off switch
Switches TV On or Off standby
To completely Off the TV, please switch off the
wall socket or remove the mains plug from the
wall socket.
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
Operation guide
Operation guide will help you to operate by using the
remote control.
Example : [Owner ID]
Owner ID
Please enter new PIN
PIN
EXIT
0 9
RETURN
Operation guide
Auto power standby function
The TV will automatically go to Standby mode in the following conditions :
no signal is received and no operation is performed for 30 minutes in Analogue TV mode
•
[Off Timer] is active in the Setup Menu (p. 18)
•
no operation is performed for the period selected in [Auto Standby] (p. 34)
•
This function does not affect the recording of Timer Programming and Direct TV Recording.
10
Rear side of the TV
- Operation guide
* * * *
PIN entry
5 Remote control signal receiver
1
Do not place any objects between the TV remote
control signal receiver and remote control.
2
6 C.A.T.S. (Contrast Automatic Tracking System)
sensor
Senses brightness to adjust picture quality when
3
[C.A.T.S.] in the Picture Menu is set to [On].
(p. 30)
7 Power and Timer LED
4
Red: Standby
Green: On
Orange: Timer Programming On
Orange (flash):
Recording of Timer Programming or Direct TV
Recording in progress
Red with orange flash:
Standby with Timer Programming On or Direct
TV Recording
The LED blinks when the TV receives a command
from the remote control.
How to use remote control
Open the main menu
Move the cursor / select from a range of options /
select the menu item (up and down only) / adjust
levels (left and right only)
Access the menu / store settings after adjustments
have been made or options have been set
Return to the previous menu
Exit the menu system and return to the normal
viewing screen