Technical Information - Panasonic Viera TX-L32X5B Operating Instructions Manual

Technical Information

Auto Aspect
The optimum size and aspect can be chosen automatically, and you can enjoy finer images.
Aspect Control Signal
[WIDE] will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI
terminal is found.
The aspect will switch to the appropriate 16:9 or 14:9 widescreen ratio.
This function will work in any aspect mode.
Input terminal
RF
AV1 / AV2
(Composite)
COMPONENT
HDMI1
HDMI2
HDMI3
Auto mode
Auto mode determines the best aspect ratio to fill the screen using a four step process (WSS, Control signal through
SCART / HDMI terminal, Letterbox detection or Justify to fill the screen).
This process may take several minutes, depending on the darkness of the image.
Letterbox detection:
If black bands at the top and bottom of the screen are detected, Auto mode chooses the best ratio and expands the
image to fill the screen.
If no aspect signals are detected, Auto mode enhances the image for optimum viewing pleasure.
Note
The ratio varies depending on the programme, etc. If the ratio is out of the standard 16:9, black bands at the top and
bottom of the screen may appear.
If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the
tracking of the VCR. Read the manual of the VCR.
70
Input signal format
DVB
PAL I
PAL 525/60 6.0 MHz
M.NTSC 6.0 MHz
PAL
PAL 525/60
M.NTSC
NTSC
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
1,125 (1,080) / 60p, 50p, 24p
Aspect Control Signal
Widescreen signal
(WSS)
–
–
–
–
–
–
–
–
–
–
–
–
–
(p. 19)
Control signal
through SCART (pin8) /
HDMI terminal