Connecting With Audio/Video Cable; Connecting With S Video Cable - Panasonic Diga DMR-EH80VEB Quick Start Manual

Connecting with Audio/Video cable

(HDD/DVD only)
4
AC mains lead
DVD Recorder
HDD/DVD OUT
AUDIO/VIDEO output
HDD/DVD OUT
Yellow (Video)
White (L)
Red (R)
3
Audio/Video cable

Connecting with S VIDEO cable

(HDD/DVD only)
4
AC mains lead
DVD Recorder
HDD/DVD OUT
S VIDEO output
AUDIO/VIDEO output
White (L)
Red (R)
Audio/Video cable 3
1
Aerial
RF IN
Aerial input
AC IN~
RF OUT
Aerial output
2
RF cable
TV
Aerial input
Audio/Video input
4
AC mains lead
1
Aerial
RF IN
Aerial input
AC IN~
RF OUT
Aerial output
2
RF cable
3
E
S VIDEO cable
TV
S VIDEO input
Aerial input
Audio/Video input
4
AC mains lead
Commonly used standard connection.
Follow the steps below.
Disconnect the power from all units.
1
Connect the aerial to the RF IN (Aerial input) of
E Aerial
the DVD Recorder.
infeed line
2
Connect the RF OUT (Aerial output) of the
DVD Recorder to the Aerial input of the
television set.
3
Connect the DVD OUT (AUDIO L/R, VIDEO) of
the DVD Recorder to the input of the
television set.
4
Connect the DVD Recorder and the television
set to the AC mains socket.
Follow the steps for Auto-Setup without Q Link
on page 4.
E
= Extra equipment for the connection shown:
RF cable (Aerial cable)
The S VIDEO connection delivers a clearer picture than the
audio/video connection.
Follow the steps below.
Disconnect the power from all units.
E
Aerial
1
infeed line Connect the aerial to the RF IN (Aerial input) of
the DVD Recorder.
2
Connect the RF OUT (Aerial output) of the
DVD Recorder to the Aerial input of the
television set.
3
Connect the AUDIO/VIDEO OUT (AUDIO L/R)
of the DVD Recorder to the input of the
television set.
Connect the S VIDEO OUT of the
DVD Recorder to the input of the television set.
4
Connect the DVD Recorder and the television
set to the AC mains socket.
Follow the steps for Auto-Setup without Q Link
on page 4.
E
= Extra equipment for the connection shown:
RF cable (Aerial cable)
S VIDEO cable
- 3 -