Panasonic KX-TG5621 Operating Instructions Manual page 31

TG562X.book Page 31 Friday, February 10, 2006 1:41 PM
Feature
Set dial mode
*5
Set flash time
*6
Set line mode
Store VM access#
V.M. access
VM tone detect
Voice enhancer
*1 If you subscribe to Caller ID service and want to view the caller's information after lifting
up the handset to answer a call, turn off this feature.
*2 KX-TG5622/KX-TG5623
*3 You can select whether or not key tones are heard when keys are pressed. Includes
confirmation tones and error tones.
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers.
*5 The flash time depends on your telephone exchange or host PBX. Consult your PBX
supplier if necessary. The setting should stay at "700ms" unless pressing {FLASH}
fails to pick up the call waiting call.
*6 Generally, the line mode setting should not be adjusted. If "Line in use" is not
displayed when another phone connected to the same line is in use, you need to
change the line mode to "A".
Customer support
The handset can display the Internet address where you can download the operating
instructions or get further information for this product using your computer.
{MENU} i "Customer support" i {Select} i {OFF}
For assistance, please visit http://www.panasonic.com/phonehelp
Feature Setting code
code
{1}: Pulse
{0}{5}{1}
{2}: <Tone> (page 17)
{1}: <700ms> {2}: 600ms
{0}{5}{2}
{3}: 400ms {4}: 300ms
{5}: 250ms {6}: 110ms
{7}: 100ms {8}: 90ms
{1}: A {2}: <B>
{0}{5}{3}
(page 32)
{0}{7}{1}
(page 33)
{3}
{1}: <On > {0}: Off
{0}{7}{2}
{1}: On {0}: <Off>
{5}
Programming
System
setting
r
r
r
r
–
r
–
31