Panasonic Viera TX-L37G15B Operating Instructions Manual page 75

From time to time, a new version of software may become available for download to enhance the performance or
operations of the TV.
■
To download from a notification banner
A notification banner will appear when you search for a new version software by using the "System Update
Search Now" function (p. 48).
In freesat mode, a notification banner will appear when the TV Guide
is exited if a new available software is found.
In DVB mode, a notification banner will appear when one of the BBC
channels is tuned if a new available software is found.
To start downloading press the OK button, this may take up to 60 minutes to complete.
To ignore the new software press the EXIT button.
You can update later automatically when the TV is in Standby mode
"To download any new software automatically" (see below)
If you do not wish to update, set "Auto Update Search in Standby" to "Off", but the notification banner will keep
appearing during the period of new software availability, usually 2 to 3 days.
■
To download any new software automatically
Ensure that the "Auto Update Search in Standby" function in the System Update menu is set to "On" (p. 48).
The TV will then download new software automatically at night if it is left in standby without any timer
programming in progress.
Note
●
During software download and update, DO NOT switch Off the TV.
SCART, S-VIDEO and HDMI terminal information
■
AV1 SCART terminal
(RGB, VIDEO, Q-Link)
Suitable inputs for AV1 include RGB (Red / Green / Blue).
Socket Earth 21
CVBS out (video) 19
CVBS earth 17
Red in 15
Red earth 13
Green in 11
Green earth 9
Blue in 7
Blue earth 5
Audio out (L) 3
Audio out (R) 1
■
AV3 S-VIDEO 4 pin terminal
Chrominance in
Chrominance earth
Updating the TV software
20 CVBS in (video)
18 RGB status earth
16 Status RGB
14 Earth
12 --
10 Q-Link data
8 Status CVBS
6 Audio in (L)
4 Audio earth
2 Audio in (R)
Luminance in
Luminance earth
Press OK to start update (may take 40 mins)
and you can update when TV is in standby.
■
AV2 SCART terminal
(RGB, VIDEO, S-VIDEO, Q-Link)
AV2 - Pins 15 and 20 are dependent on AV2 S-VHS / VIDEO
switching.
Socket Earth 21
CVBS out (video) 19
CVBS earth 17
Red in, S.C. - in 15
Red earth 13
Green in 11
Green earth 9
Blue in 7
Blue earth 5
Audio out (L) 3
Audio out (R) 1
■
HDMI terminal
Hot Plug Detect 19
DDC/CEC Ground 17
SCL 15
CEC 13
TMDS Clock Shield 11
TMDS Data0− 9
TMDS Data0+ 7
TMDS Data1 Shield 5
TMDS Data2− 3
TMDS Data2+ 1
Found new software version .
or Press EXIT to ignore
20 CVBS in (video)
18 RGB status earth
16 Status RGB
14 Earth
12 --
10 Q-Link data
8 Status CVBS
6 Audio in (L)
4 Audio earth
2 Audio in (R)
18 +5V Power
16 SDA
14 Reserved
(in cable but N.C. on device)
12 TMDS Clock−
10 TMDS Clock+
8 TMDS Data0 Shield
6 TMDS Data1−
4 TMDS Data1+
2 TMDS Data2 Shield
75