Panasonic Viera TX-L37G15B Operating Instructions Manual
Panasonic Viera TX-L37G15B Operating Instructions Manual

Panasonic Viera TX-L37G15B Operating Instructions Manual

Lcd television
Hide thumbs Also See for Viera TX-L37G15B:

Advertisement

Operating Instructions

LCD Television
TX-L37G15B
Model No.
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
U.K. Standard
English
TQB0E0816

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic Viera TX-L37G15B

  • Page 1: Operating Instructions

    Operating Instructions LCD Television TX-L37G15B Model No. Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only. U.K. Standard English TQB0E0816...
  • Page 2: Features

    Features ■ freesat HD tuner built-in Receives freesat - free digital satellite broadcasts in the UK This TV has a built-in freesat HD tuner. freesat is a brand new free digital TV service which broadcasts via satellite so you can receive TV, radio, interactive TV, and HD TV with crystal clear reception.
  • Page 3: Table Of Contents

    Input Labels ····················································· 46 ● Shipping Condition ·········································· 47 V-Audio ProSurround ● Advanced Settings ·········································· 48 Utilises Panasonic’s advanced digital ● Recording Controls ·········································· 50 amplification technology. ● Using Network Services ·································· 52 (DLNA / VIERA CAST / freesat) Up to 60,000 hours LCD Panel Lifetime ●...
  • Page 4: Safety Precautions

    If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained. A replacement fuse cover may be purchased from your local Panasonic dealer. If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be removed and the mains plug cut off and disposed of safety.
  • Page 5: (Warning & Caution) Notes

    Be sure to ● Do not allow the cabinet and pedestal to make contact with a rubber ask your local Panasonic dealer to or PVC substance for a long time. perform setup. ●...
  • Page 6: Accessories / Options

    WARNING! ● Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer. Any damage resulting from not having a professional installer mount your unit will void your warranty.
  • Page 7: Securing The Tv

    Do not use the pedestal if it becomes warped or physically damaged. ● If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer immediately. During set-up, make sure that all screws are securely tightened. ●...
  • Page 8: Identifying Controls

    Accessories / Options Using the clamper To tighten: To loosen: Keep the Rear of the TV knob pressed ● Do not bundle the Satellite cable, RF cable and mains lead together (could cause distorted image). ● Fix cables with clampers as necessary. ●...
  • Page 9 Identifying Controls Remote Control VIERA IMAGE VIEWER (p. 60) Input mode selection ● Switches to SD Card viewing mode ● TV - switches freesat / DVB / Analogue / Other Sat. mode (p. 15) Standby On / Off switch ● AV - switches to AV input mode from Input ●...
  • Page 10: Basic Connection

    Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. Example 1 Connecting dish or aerial TV only Rear of the TV Terrestrial aerial Satellite...
  • Page 11 Example 3 Example 2 Connecting DVD Recorder / Connecting DVD Recorder / VCR VCR and Cable TV box TV, DVD Recorder or VCR TV, DVD Recorder / VCR and Cable Rear of the TV Rear of the TV Terrestrial Terrestrial aerial aerial AC 220-240 V...
  • Page 12: Auto Setup

    Auto Setup Search and store TV channels automatically. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 10 and p. 11) and settings (if necessary) of the connected equipment before starting Auto Setup.
  • Page 13 Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu. ■ How to use remote control Move the cursor / adjust levels / select from Move the cursor / select the menu item a range of options Access the menu / store settings after BACK/...
  • Page 14: How To Use Viera Tools

    How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. ● For “VIERA Link Control”, “Pause Live TV” and “Media Server” functions to operate correctly, ensure the connections and settings are completed. VIERA Link Control / Pause Live TV: “Summary of Q-Link and VIERA Link features”...
  • Page 15: Watching Tv

    Watching TV Turn power on (Press for about 1 second) ● Mains power On / Off switch should be On. (p. 8) Select the mode (freesat, DVB, Analogue or INPUT Other Sat.) ASPECT MENU watch TV Selection EXIT freesat select Analogue Displayed if Other Satellite Other Sat.
  • Page 16: Display Information Banner

    Watching TV Display Information banner Display Information banner ● Also appears when changing a channel Channel position Channel type and name TV mode (if it is Radio or Data channel) Current time Example (freesat): 103 ITV Wales Radio 19:35 freesat Channel List Programme Coronation Street 19 : 30 - 20 : 00...
  • Page 17 Aspect ASPECT Change the aspect ratio (image size) Enjoy viewing the image at its optimum size and aspect. Normally programmes have the Aspect Control Signal (Widescreen signal, etc.), and the TV will choose the aspect ratio automatically according to the Aspect Control Signal (p. 74). ■...
  • Page 18: Using Tv Guide

    Using TV Guide TV Guide―Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). ● When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time before the TV Guide is completely shown.
  • Page 19: View Tv Guide

    DVB or Analogue mode ● This TV supports the GUIDE Plus+ system in DVB or Analogue mode. ● The Gemstar branding partner will supply the rating informations in the programme information and the recommended group in the Prog.Type list. ● Analogue channels will be listed after DVB channels but there will be no programme listings.
  • Page 20 Using TV Guide ■ Other useful functions (Operate whilst viewing TV Guide) Watch the programme Select the current Select “View” (freesat or DVB mode) programme or channel Eastender 19:30- 20:00 select View Timer Programming select ● Timer Programming access watch see below (TV screen) View details of the programme (freesat or DVB mode)
  • Page 21: Viewing Teletext

    Viewing Teletext You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster) ● The availability of teletext services for a programme is indicated by “TXT” in the information banner. Information banner (p. 16) 1 BBC ONE Wales 20:35 All DVB Channels Coronation Street...
  • Page 22 Viewing Teletext Analogue teletext Analogue teletext services Analogue teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FASTEXT mode? In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button.
  • Page 23 INDEX Return to the main index page INDEX Subtitles View a favourite page stored ● Factory setting is “P888” (subtitle service) on the blue button (List mode). STTL View in multi window Watch TV and Teletext in two windows at once ●...
  • Page 24: Watching External Inputs

    Watching External inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input. ● To connect the equipment p. 11 and p. 72 The Remote Control is capable of operating some functions of selected external equipment. Turn the TV on ■...
  • Page 25 Start recording ■ How to change the code for the type of the equipment Each type of the Panasonic equipment has its own remote control code. Please change the code according to the equipment you want to operate. DVD/VCR Set the position to “DVD/VCR”...
  • Page 26: How To Use Menu Functions

    How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu ● Displays the functions that can be set INPUT MENU (varies according to the input signal) ASPECT MENU DIRECT TV REC Select the menu EXIT...
  • Page 27 ■ Overview (Picture, Sound) ● How to operate p. 26 Main Menu Picture Picture Menu Viewing Mode Dynamic Contrast Sound Brightness Colour Setup Sharpness Available in NTSC Tint Colour Balance Warm Not available in PC Colour Management Eco Mode Picture Menu Not available in PC P-NR 3D-COMB...
  • Page 28 How to Use Menu Functions Available in PC ■ Overview (Setup) PC Setup Input Resolution 1024 × 768 ● How to operate p. 26 Clock H-pos Main Menu V-pos Clock Phase Sync H & V Picture Reset to Defaults Reset (p.
  • Page 29 Sending Preset Data Please wait! Child Lock 100% Change PIN Access Remote control unavailable Child Lock List Access Child Lock List - TV and AV (p. 32) (p. 45) Name Input Type Lock BBC 1 Wales freesat Free TV BBC THREE Free TV Lock Free TV...
  • Page 30: Menu List

    How to Use Menu Functions ■ Menu list Menu Item Adjustments / Configurations (alternatives) Selects four different screen settings (Dynamic / Normal / Cinema / Game) In each Viewing Mode setting, Contrast, Brightness, Colour, Sharpness, Tint, Colour Balance, Colour Management, Eco Mode and 3D-COMB can be adjusted and stored to suit your particular viewing requirement (e.g., you may require different settings for viewing sports, films, news etc.) ●...
  • Page 31: Volume Correction

    Menu Item Adjustments / Configurations (alternatives) Select two different sound settings (Music / Speech) In each Sound Mode setting, Bass and Treble can be adjusted and stored to suit your Mode particular sound requirement ● Changes to any settings in a mode will affect all signal sources ●...
  • Page 32 How to Use Menu Functions ■ Menu list Menu Item Adjustments / Configurations (alternatives) Timer Programming Records forthcoming channels (p. 50) Off Timer Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) VIERA Link Sets to use VIERA Link functions (Off / On) (p.
  • Page 33 Menu Item Adjustments / Configurations (alternatives) Teletext Analogue teletext display mode (FASTEXT / List) (p. 22) Selects the preferred language for digital channel subtitles (depending on the Preferred Subtitles broadcaster) ● To display subtitles p. 16 Input Labels Labels or skips each input terminal (p. 46) Banner Display Sets how long the Information banner (p.
  • Page 34: Retuning From Setup Menu

    Retuning from Setup Menu Auto Setup retunes all channels automatically. freesat channels Automatically retune all the freesat channels received in the area. ● Only freesat channels are retuned. ● All the previous tuning settings are erased. ● If a Child Lock PIN number (p. 45) has been set, it must be entered. Select freesat p.
  • Page 35 DVB or Analogue channels Automatically retune all DVB or Analogue channels received in the area. ● Only DVB channels are retuned in DVB mode. ● Only Analogue channels are retuned in Analogue mode. ● All the previous tuning settings are erased. ●...
  • Page 36: Tuning And Editing Channels (Freesat)

    Tuning and Editing Channels (freesat) You can retune channels or make your favourite channel list, skip unwanted channels, etc. Select freesat p. 15 INPUT Display the menu MENU MENU EXIT Select “Setup” access BACK/ Main Menu RETURN Picture Sound select Setup Select “freesat Tuning Menu”...
  • Page 37: Favourites Edit

    List favourite freesat channels Favourites Edit Create your favourite channel list from various broadcasters. The freesat Favourites list is available from “Channel Genre” in the TV Guide (p. 18). Select a channel to list freesat Favourites Editor All freesat Channels Favourites BBC 1 Wales BBC 2 Wales...
  • Page 38: Tuning And Editing Channels (Dvb)

    Tuning and Editing Channels (DVB) You can retune channels or make your favourite channel lists, skip unwanted channels, etc. Select DVB p. 15 INPUT MENU Display the menu EXIT MENU Select “Setup” access Main Menu BACK/ RETURN Picture Sound select Setup Select “DVB Tuning Menu”...
  • Page 39: Manual Tuning

    List favourite DVB channels Favourites Edit Create your favourite channel lists from various broadcasters (up to 4: Favourites1 to 4). The DVB Favourites lists are available for switching in the Information banner (p. 16) and from “Category” in the TV Guide (p. 19). Select a channel to list DVB Favourites Editor All DVB Channels...
  • Page 40: Tuning And Editing Channels (Analogue)

    Tuning and Editing Channels (Analogue) You can retune channels or skip unwanted channels, edit channels etc. Select Analogue p. 15 INPUT Display the menu MENU MENU EXIT Select “Setup” access BACK/ Main Menu RETURN Picture Sound select Setup Select “Analogue Tuning Menu” access Setup Menu Timer Programming...
  • Page 41 Skip unwanted Analogue channels, Edit Analogue channels Channel List You can hide unwanted Analogue channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels. Select a channel and reveal / hide reveal / hide Analogue Channel List ●...
  • Page 42: Tuning And Editing Channels (Other Sat.)

    Tuning and Editing Channels (Other Sat.) You can tune all receivable digital satellite channels or skip unwanted channels, etc. ● Some of Other Sat. functions may work to differing specifications (depending on the broadcasters). Select freesat or Other Sat. p. 15 INPUT MENU Display the menu...
  • Page 43: Add New Channels

    Set all receivable digital satellite channels Auto Setup Any receivable digital compliant satellite channels can be tuned. ● Only Other Sat. channels are retuned. ● All the previous tuning settings are erased. ● If a Child Lock PIN number (p. 45) has been set, it must be entered. Select the satellite ●...
  • Page 44: Tuning And Editing Channels

    Tuning and Editing Channels (Other Sat.) List favourite Other Sat. channels Favourites Edit Create your favourite channel lists from various broadcasters (up to 4: Favourites1 to 4). The Other Sat. Favourites lists are available for switching in the Information banner (p. 16). Select a channel to list Other Sat.
  • Page 45: Child Lock

    Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears; by entering the PIN number, you can watch it. Display the menu MENU MENU EXIT Select “Setup”...
  • Page 46: Input Labels

    Input Labels For easier identification and selection of the input mode, you can label each input mode or skip terminal that is not connected to any equipment. ● To select the input mode p. 24 Display the menu MENU MENU EXIT Select “Setup”...
  • Page 47: Shipping Condition

    Shipping Condition Resets the TV to its original condition, i.e. no channels tuned in. All settings other than “Owner ID” are reset (channels, picture, sound settings, etc.). Display the menu MENU MENU EXIT Select “Setup” access Main Menu Picture Sound select Setup Select “System Menu”...
  • Page 48: Advanced Settings

    Advanced Settings Advanced Settings provide various features. Select freesat, DVB, Analogue or Other Sat. p. 15 INPUT ASPECT MENU DIRECT TV REC EXIT Display the menu MENU Select “Setup” BACK/ BACK/ OPTION RETURN RETURN access Main Menu Picture Sound TEXT STTL INDEX HOLD select Setup Select “System Menu”...
  • Page 49: Common Interface

    Input owner ID Owner ID Entry of the PIN number and personal information (your name, address and postcode). In the unfortunate event of theft it will help the Police to determine the owner. Enter the PIN number (4 digits) ● Enter the PIN number twice at first setting.
  • Page 50: Recording Controls

    Recording Controls Timer Programming from Menu The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the TV will switch on and tune to the correct channel (even if the TV is in Standby mode). TV Guide may also be used to set timer programming.
  • Page 51: Timer Programming

    Set timer programming details Timer Programming Start making the settings Repeat the operations as below, and set items in the order of ● can also be entered with numeric buttons. select the item FS: freesat pqrs wxyz Timer recording D: DVB Records according to the time setting A: Analogue Guide: Guide link recording...
  • Page 52: Using Network Services

    56 - 58 VIERA CAST™ VIERA CAST is a gateway to the internet services unique to Panasonic. By connecting the TV to the internet environment, VIERA CAST allows you to enjoy internet content on the TV screen such as photos, movies, weather, etc. from VIERA CAST home screen.
  • Page 53 Network connections ● If you do not have a Broadband network services, please consult your retailer for assistance. ● Confirm the terms and conditions of the contracts with your Internet Service Provider (ISP) or telecommunications company. ● Use the Shielded Twist Pair (STP) LAN cable to connect the TV to the network equipment. ●...
  • Page 54 Using Network Services (DLNA / VIERA CAST / freesat) Network Setup ● Ensure the connections are completed before starting Network Setup. “Network connections” (p. 53) Display the menu MENU MENU EXIT Select “Setup” access Main Menu Picture Sound BACK/ select Setup RETURN Select “Link Settings”...
  • Page 55 Network Settings Set the network setting items If you make the network connection like “Example 2” (p. 53), you do ■ Acquire IP Address not have to set “Acquire DNS Address”, “Proxy” and “Proxy Port”. ■ Acquire DNS Address Sets IP Address, Subnet Mask, Gateway, Primary DNS and Secondary DNS. For most users, the recommended method of connection to your network is by using Auto feature.
  • Page 56 Using Network Services (DLNA / VIERA CAST / freesat) Using DLNA features ® ● Ensure the preparation of media server, network connections and network settings are completed. “Media server” (p. 52), “Network connections” (p. 53), “Network Setup” (p. 54 and p. 55) Display the Input select menu INPUT Select “Media Server”...
  • Page 57 Slideshow (for photo contents) ■ Start Slideshow (operate in step Select the photo for the first view Start Slideshow ● To pause ● To return to Single view green Note ● Slideshow is done for all available photo contents. ■ Slideshow settings (operate in step Display the...
  • Page 58 Using Network Services (DLNA / VIERA CAST / freesat) DivX® VOD ABOUT DIVX VIDEO-ON-DEMAND: This DivX® Certified device must be registered in order to play DivX Video-on-Demand (VOD) content. First generate the DivX VOD registration code for your device and submit it during the registration process. [Important: DivX VOD content is protected by a DivX DRM (Digital Rights Management) system that restricts playback to registered DivX Certified devices.
  • Page 59 ● The services through VIERA CAST™ are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. ●...
  • Page 60: Viewing From Sd Card

    Viewing from SD Card (VIERA IMAGE VIEWER) Photo View : Still images recorded by digital cameras will be displayed. Movie View : Moving pictures recorded by digital video cameras will be played back. ● During the operation, sound signal is output from AV1, AV2, AUDIO OUT and DIGITAL AUDIO OUT terminals. But no video signals are output.
  • Page 61: Slideshow Settings

    Slideshow ■ Start Slideshow (operate in step Select the photo for the first view Start Slideshow ● To pause ● To return to Single view green Note ● Slideshow is done within the thumbnail. ● You can also start slideshow directly by using VIERA TOOLS “How to Use VIERA TOOLS”...
  • Page 62: Audio Output Settings

    Viewing from SD Card (VIERA IMAGE VIEWER) Movie View Insert the SD Card access Select “Movie View” SD Card select Photo View ● Movie View INPUT You can also access directly by using VIERA TOOLS ASPECT MENU DIRECT TV REC “How to Use VIERA TOOLS”...
  • Page 63: (Viera Image Viewer) Displaying Pc Screen On Tv

    Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. ● To connect PC p. 72 Select the external input INPUT ASPECT MENU...
  • Page 64: Link Functions

    Connect the equipment supporting VIERA Link to the TV’s HDMI1, HDMI2, HDMI3 or HDMI4 terminal via an HDMI cable. ● About HDMI cable for connecting Panasonic HD Video Camera or LUMIX Camera, read the manual of the equipment. ■ VIERA Link (HDMI and SCART connections)
  • Page 65 ■ VIERA Link (HDMI and Audio out connections) Connected equipment Player theatre with Blu-ray Disc theatre with Amplifier with VIERA Link function VIERA Link function VIERA Link function Features Analogue channel download – – – ∗ ∗ Easy playback – Power on link –...
  • Page 66: Viera Link

    Link Functions Q-Link VIERA Link Q-Link ■ Preparations ● Connect the DVD Recorder / VCR with the following logos: “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” ● Q-Link connection p. 64 ● Use fully wired SCART cable. ● Set up the DVD Recorder / VCR.
  • Page 67 VIERA Link “ Control™” ∗ ∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 4” function. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically (p. 64 and p. 65).
  • Page 68: Standby Power Save

    Link Functions Q-Link VIERA Link ■ Features available Reduce unnecessary power consumption in standby Standby Power Save Set Standby Power Save “On” in the Setup Menu to use this function “Standby Power Save” (p. 32) The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronization with the TV On / Off state to reduce the consumption.
  • Page 69: Pause Live Tv

    ■ Features available (Using VIERA Link Menu) Pause Live TV programme Pause Live TV You can pause the live TV programme and resume later. Live TV programme will be recorded on HDD of the connected DIGA Recorder. ● This function is available with DIGA Recorder which has HDD. ●...
  • Page 70: Viera Link Control

    Link Functions Q-Link VIERA Link ■ Features available (Using VIERA Link Menu) Control the menu of the connected equipment by VIERA remote control VIERA Link Control You can control some functions of the connected equipment with this TV remote control (point the remote control at the TV’s signal receiver).
  • Page 71: Speaker Selection

    ■ Features available (Using VIERA Link Menu) Speaker control Speaker Selection You can control the theatre speaker with this TV remote control (point the remote control at the TV’s signal receiver). ● If you cannot operate, check the settings and the equipment “Summary of Q-Link and VIERA Link features”...
  • Page 72: (Q-Link / Viera Link) External Equipment

    External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the table below, and the specifications (p. 87). To listen with speakers RCA cable Network Amplifier with speaker system...
  • Page 73 Satellite Cable Rear of the TV dish To watch cable Satellite cable broadcasts Cable TV box (S-VIDEO) Fully wired HDMI Terrestrial compliant cable aerial (VIDEO) (AUDIO) HDMI equipment Camcorder / “HDMI connection” (p. 78) Game equipment Fully wired HDMI DVD Recorder compliant cable RF cable Fully wired...
  • Page 74: Technical Information

    Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 17) ■ Aspect Control Signal “WIDE” will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI terminal is found.
  • Page 75 Updating the TV software From time to time, a new version of software may become available for download to enhance the performance or operations of the TV. ■ To download from a notification banner A notification banner will appear when you search for a new version software by using the “System Update Search Now”...
  • Page 76 Technical Information DivX ABOUT DIVX VIDEO: DivX ® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. ■ DivX video file Extension - “.divx” or “.avi” Image resolution - Up to 720 × 576 pixels ●...
  • Page 77 ● Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV. (Panasonic is not liable for any deterioration or damage of recorded data.) ■ Data format for Card browsing ●...
  • Page 78 Technical Information HDMI connection HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a DVD player, a set top box or a game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
  • Page 79 Input signal that can be displayed COMPONENT (Y, P ), HDMI ∗ Mark: Applicable input signal Signal name COMPONENT HDMI ∗ ∗ 525 (480) / 60i ∗ ∗ 525 (480) / 60p ∗ ∗ 625 (576) / 50i ∗ ∗ 625 (576) / 50p ∗...
  • Page 80: Faqs

    FAQs Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre for assistance. For details (p. 88) freesat Auto Setup cannot...
  • Page 81 Problem Actions ● Set “P-NR” in the Picture Menu (to remove noise). (p. 30) ● Chaotic image, noisy Check nearby electrical products (fluorescent lamp, DECT phones, mobile phones, microwave, etc.). ● Is “Colour” or “Contrast” in the Picture Menu set to the minimum? No image can be displayed (p.
  • Page 82 FAQs Problem Actions ● Set the sound setting of the connected equipment to “2ch L.PCM”. ● Sound is unusual Check the “HDMI1 / 4 Input” setting in the Sound Menu. (p. 31) ● If digital sound connection has a problem, select analogue sound connection.
  • Page 83: On Screen Messages

    ● Please check aerial or local signal Please follow the message. availability. If it is still failed, consult your local Panasonic dealer. Press OK to start Auto Setup. ● No module inserted Check the CI module inserted completely (p. 49).
  • Page 84 On screen messages Message Meaning / Action ● PIN incorrect! The PIN number you entered is wrong. Please check settings and connections ● Communication error in VIERA Link function (p. 67). on HDMI devices. ● Please enter a frequency between The frequency you entered is out of range.
  • Page 85: Licence

    HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ● HDAVI Control™ is a trademark of Panasonic Corporation. ● “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. ● x.v.Colour™ is a trademark. ● Manufactured under license from Dolby Laboratories.
  • Page 86: Glossary

    Glossary ■ ■ ■ DLNA NTSC SCART Digital Living Network Alliance National Television System 21 pin connection used for video, ■ Committee audio and switching signals (Also One of the television signals known as Euro SCART and Digital Video Broadcasting ■...
  • Page 87: Specifications

    Specifications Power Source AC 220-240 V, 50 / 60 Hz Power Consumption 165 W Power Consumption in 0.3 W (Without monitor out recording) Standby mode 32 W (With monitor out recording) Aspect Ratio 16:9 94 cm (diagonal) Visible screen size 819 mm (W) ×...
  • Page 88 • Most major credit and debit cards accepted. • All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd. • It couldn’t be simpler! • Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details.

Table of Contents