If You Need Help - Panasonic Diga DMR-EX80S Operating Instructions Manual

If you need help

TV GUIDE
The displayed information is
wrong or incomplete.
No data.
No current data in spite of active
EPG Download in Standby mode.
,
SATELLITE-DISH
No satellite found.
Not enough transponders found.
No station found.
Video or audio interference.
DVB-S
Unusual station sorting.
No teletext.
After the Auto-Setup, there are
no stations in the station list
although found stations were
displayed.
SOFTWARE UPDATE
When are software updates
broadcast?
No more programmes are
received after an update.
80
The broadcasting companies are responsible for the information. Deviations
are possible with last-minute changes.
The satellite dish is not aligned to Astra 19.2° E.
EPG Download in Standby was set to [Off].
The automatic time setting is not activated. Note winter and summer time.
The unit has been unplugged for a longer period of time. Proceed with a
manual EPG Download.
Menu Setup - Others - System Update - [EPG Update Search Now]
The signal is too weak or no signal was found.
A data download was not possible. Switch the unit to standby overnight.
Check the satellite dish and align it exactly to the position of the satellite.
Check that the satellite cable and connections are correctly in position with
a firm contact.
Check the reception capacity of the satellite
enough for good reception. There must not be any hindrances in the way
which could impair reception, e.g. twigs, leaves, snow.
The receiver (LNB) of the satellite
The reception capacity of the satellite
Reception is impaired by rain or snow.
This unit has a default station sorting.
Use profiles to sort the stations as you want them.
This DVD Recorder does not support teletext.
An Auto-Setup was started and interrupted. Do another Auto-Setup and
let it run through to the end. The data are not stored until then.
The search for new software takes place automatically or at the selected
time when the unit is in Standby mode. The software is updated when a
new version is found. The unit display shows the software update.
To prevent automatic updates, select the setting
[Software Update in Standby - Off].
Depending on the update contents, some settings can be returned to the
original factory setting. Proceed with tuning again with an Auto-Setup Restart.
Menu Setup - Tuning - Auto-Setup Restart
dish . The dish must be large
dish must be suitable for digital reception.
dish is not sufficient.
67
67
58
19
58
67
58