Sound Display - Panasonic Diga DMR-EX80S Operating Instructions Manual

FUNCTION MENU
Dynamic Range Compression
Setup
Bilingual Audio Selection
Digital Audio Output
Audio Mode for XP Recording Dolby Digital
Tuning
Disc
Audio Mode for DV Input
Picture
Sound
Display
SELECT
Connection
OK
Others
Setup
Digital Audio Output
PCM Down Conversion
Dolby Digital
Tuning
DTS
Disc
MPEG
Picture
Sound Dolby Digital
Display
Bitstream
Connection
PCM
Others
SELECT
OK
RETURN
Setup
Language
On-Screen Messages
FL Display
Tuning
Disc
Picture
Sound
SELECT
Display
TAB
Connection
RETURN
Others
To Others
Sound
Off
M1
Dynamic Range Compression
On: The volume for quiet passages is increased and the volume for loud passages
is decreased. The sound can be clearly understood even when the volume is
Stereo 1
lowered.
Bilingual Audio Selection
TAB
To record programmes broadcast in dual channel sound, you can choose between
RETURN
the original language [M1] or another available language [M2]. If you are copying
from another external source, select the soundtrack on the other unit.
Digital Audio Output
Off
Select the corresponding setting if you have connected an external unit to the
Bitstream
DIGITAL AUDIO OUT of the DVD Recorder.
Bitstream
PCM Down Conversion
PCM
Select the audio output mode for a sample rate of 96 kHz or 88.2 kHz.
Despite this setting, signals are converted to 48 kHz or 44.1 kHz if they have a
sample rate of more than 96 kHz or 88.2 kHz or the disc is copy-protected.
On: The connected unit cannot process signals with a sample rate of 96 kHz
or 88.2 kHz. Signals are converted to 48 kHz or 44.1 kHz.
Off: The connected unit can process signals with a sample rate of 96 kHz or 88.2
kHz. Signals are output with 96 kHz or 88.2 kHz.
Dolby Digital, DTS, MPEG
Bitstream: The connected unit can decode the corresponding signal.
PCM: If the connected unit cannot decode the corresponding signal, the setting
must be changed to [PCM]. Otherwise the loud noise can damage your hearing
or loudspeakers. Make the necessary changes according to your audio system.
Audio Mode for XP Recording
Choice of audio type when recording in XP mode. The picture quality of LPCM
recordings may be poorer than normal recordings in XP mode.
Audio Mode for DV Input
Choice of audio type when recording from the DV input.
Stereo 1: Original sound Stereo 2: Voice-over Mix: Original sound + voice-over
Display
German
Language
5 sec.
Select the menu language.
Bright
On-Screen Messages
Select the display time for screen flashes.
Off: Screen flashes are not shown on changing the station.
FL Display
Dim: Changes the brightness of the display on the unit.
Automatic: This setting reduces power consumption in standby mode. The display
is dark during replay. Press any key to light up the display again. The display goes
off when the unit is switched off.
Setup
Settings
OK
DVD-V
-RW(V)
-R -R DL +R +R DL
-R -R DL -RW(V) +R +R DL
Settings
OK
Options
[On] [Off] (only Dolby Digital)
+RW [M 1] [M 2]
[On] [Off]
[Bitstream] [PCM]
[Dolby Digital] [LPCM]
[Stereo 1] [Stereo 2] [Mix]
+RW
Options
[English] [German]
[Off] [3, 5, 7, 10 sec.]
[Bright] [Dim] [Automatic]
OK
OK
63