Connections; Battery Installation/Replacement - Panasonic KX-TG7100CX Operating Instructions Manual

TG7100CX(e).book Page 7 Tuesday, May 23, 2006 9:02 AM

Connections

When connecting the AC adaptor to the
base unit, a short beep will be heard. If it is
not heard, check the connections.
(220–240 V, 50/60 Hz)
To telephone
network
Use only the included
AC adaptor and
telephone line cord.
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
L The unit will not work during a power
failure. We recommend connecting a
corded telephone to the same telephone
line or to the same telephone jack using a
T-adaptor.
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
– in a convenient, high and central
If you subscribe to a DSL service
L Please attach a noise filter (contact your
DSL service provider) to the telephone
line between the base unit and the
Hook
telephone line jack in the event of the
following:
– Noise is heard during conversations.
– Caller ID features (page 20) do not
Battery
installation/replacement
Important:
L Use only the included rechargeable
batteries noted on page 4, 5.
L When replacing batteries, we recommend
using the Panasonic rechargeable
batteries noted on page 4, 5.
L Wipe the battery ends (S, T) with a dry
cloth.
L Install the batteries without touching the
battery ends (S, T) or the unit contacts.
Preparation
TVs, radios, personal computers or
other phones.
location.
function properly.
Telephone
line cord
To single-line
telephone jack
Noise filter
(For DSL users)
7