Pioneer LaserDisc CLD-D504 Operating Instruction page 20

PROGRAMMED PLAYBACK (PLAYING CHAPTERS/TRACKS BY
CHANGING THEIR ORDER AS REOUIRED
Desired chapters (LD) or tracks (CDV/CD) can be programmed to
be p ayed in a desired order. Up to 24 chapters/tracks can be
programmed at a trme.
. Programming operation can be made easier by observing the
on-screen display or display window during operation.
2 0
< v R B 1 1 4 7 >
3. Press >
Programmed playback starts after searching the first pro-
grammed traclvchapter. In the examples above, the pro-
grammed playback starts from chapter^rack No. L When
chapter/track Nos. 9, 7, and then
'18
have been played,
the player enters stop mode.
a-
E
Programming pauses together with chapternrack numbers is very
convenient for recording the programmed playback.
.
ln case oJ recording the programmed playback on two sides of
an audio tape, it is recommended to program a pause after the
last chapter^rack to be recorded on the first side of the tape.
This makes it possible to flip the tape while playback is paused
and avoid making a reco'ding rr'staIe.
.
While programmed playback is paused, it is possible to record a
narration of create a non-recorded blank. Pressing tt in pause
mode Tesumes programmed playback so that recording can be
restarted.
. t is not possible to record a pause as the final step of the
program.
Indication of orocrammed
'll appears on
wrndow.
To check the proqrammed contents
When PGM is pressed during or after programmed playback, the
programmed contents can be displayed on the TV screen. PTess-
ing PGM again turns off the display of the programmed contents.
To modifv oroqrammed content
To delete a programmed chapter number, track number or pause :
1, Pless PGM.
2. Ploss oither D or K
to move > (the cursorl to the chap-
ter number, tlack number or pauso to bg modifigd.
lf vou want to replace that content, oress the numeric bLrtton. lf
you want to program a pause, press ll.
lI you want to clear the contedt. prgss CLEAR.
3. Press PGM to complote.
lf you press > in place of PGM, programrned playback starts
from the first programmed chapter or track.
o lt is not possible to replace or clear the chapter or track being
oraveo.
. Open the disc table.
. Press CLEAR in stop mode.
.
When CLEAR is pressed during playback, the programmed play-
back is cance ed and normal playback starts. Pressing CLEAR
again also clears the programmed contents.
the TV screen and 'PA' appears on the display
of
m
1. Press PGM.
2 . S e l e c t t h e c h a p t e r s o r t r a c k s t o b e p r o -
grammed.
<With a double-sided LD>
E x a m p l e : P r o g r a m m i n g c h a p t e r I o n s i d e B , c h a p t e r 7
on side A and then chapter 18 on side B
O
Select side A or B.
=
E
=
t-l
I t l
LJ
\4 Specfiy rne
-
t-l
t t l
L--l
o Program the n
@ above.
E
chapter number.
E
ext chapter by repeating steps @ and
Eu [-r *Eu EE
<With a single-sided LD, CD or CDV>
Example : Programming CD tracks 9, 7, and then
'18
. Press numeric buttons 9. 7. +10 then 8.
EEEEE\
lf you press a wrong numeric butlon :
Press CLEAB, then press correct numeric button(s).